Md. Code Regs. 10.15.11.14

Current through Register Vol. 51, No. 24, December 2, 2024

Section 10.15.11.14 - Labeling and Marking of Finished Product Water

The person-in-charge shall ensure that:

A. The information required on a container of bottled water is placed on a label attached to the container or marked directly on the container in a way that ensures the information is clear and available to the consumer for the entire shelf life of the bottled water;

B. The following information is placed on a container of bottled water:

(1) The type of water as set forth in Health-General Article, §21-336(c), (f)(2), and (g), Annotated Code of Maryland, 21 CFR § 165.110(a), and this chapter;

(2) The name and address of the manufacturer or distributor;

(3) The net fluid measure of the contents of the container in common and metric units; and

(4) A production code as required in Health-General Article, §21-336(f)(1), Annotated Code of Maryland, and 21 CFR § 129.80(e); and

C. The label includes all the information required in 21 CFR § 165.110(a).

Md. Code Regs. 10.15.11.14