Md. Code Regs. 03.03.05.32

Current through Register Vol. 51, No. 22, November 1, 2024

Section 03.03.05.32 - Additives for Gasoline

A. Additives may be injected by a licensed dealer, other than a Class A dealer, with an "in-line blending" process or an equivalent or superior to in-line blending system to ensure proper additization of gasoline and only with prior approval from the Comptroller.

B. Form of Applications.Applications shall include the following:

(1) A description of the system used to inject the additive into fuel, including a detailed summary of the additive injection and delivery process, verifiable identification that the process is "in-line blending" or equivalent to or superior to in-line blending, and any security systems to ensure proper additization of gasoline;

(2) Detailed system schematics and manufacturer information describing the equipment used in the system; and

(3) The EPA registration for the additive which shall be approved by the Comptroller.

C. The Comptroller reserves the right to rescind any prior approval of additive introduction into gasoline by a dealer other than a licensed Class A dealer, or issue a stop sale to said dealer, for failure to comply with any statute, regulation or licensing requirements, or for product failure after the Comptroller's laboratory analysis.

Md. Code Regs. 03.03.05.32

Regulation .32 adopted effective July 20, 1977 (4:15 Md. R. 1145)
Regulation .32 amended effective April 20, 1979 (6:8 Md. R. 650)
Regulation .32A amended effective December 12, 1980 (7:25 Md. R. 2332)
Regulation .32B amended effective December 12, 1980 (7:25 Md. R. 2332); March 14, 1983 (10:5 Md. R. 463)
Regulation .32D amended effective February 10, 1978 (5:3 Md. R. 135)
Regulation .32 adopted effective 41:9 Md. R. 519, eff.5/12/2014