La. Admin. Code tit. 42 § III-4303
Current through Register Vol. 50, No. 6, June 20, 2024
Section III-4303 - Specifications for Chips and TokensA. Chips and tokens shall be designed, manufactured, and constructed in compliance with all applicable statutes, regulations, and policies of the United States, Louisiana, and other states to prevent counterfeiting of the chips and tokens to the extent reasonably possible. Chips and tokens shall not resemble any current or past coinage of the United States or any other nation.B. In addition to other specifications as the division may approve, all chips and tokens shall contain: 1. the name of the issuing gaming establishment inscribed on each side of each chip and token;2. the city, or other locality, and the state where the establishment is located inscribed on at least one side of each chip and token unless the division approves otherwise;3. the value of the chip or token inscribed on each side of each chip and token except for chips used exclusively at roulette; and4. the manufacturer's name or a distinctive logo or other mark identifying the manufacturer inscribed on at least one side of each chip or token.C. Each chip or token shall be designed so that when stacked with chips or tokens of other denominations and viewed on closed circuit, black and white televisions, the denominations can be distinguished from that of the other chips or tokens in the stack.D. Electronic chips shall contain other additional specifications as the division may approve.La. Admin. Code tit. 42, § III-4303
Promulgated by the Department of Public Safety and Corrections, Gaming Control Board, LR 38:1682 (July 2012).AUTHORITY NOTE: Promulgated in accordance with R.S. 27:15 and 24.