La. Admin. Code tit. 33 § V-1725

Current through Register Vol. 50, No. 6, June 20, 2024

Section V-1725 - Standards: Sampling Connection Systems

A. Each sampling connection system shall be equipped with a closed purge, closed loop, or closed-vent system. This system shall collect the sample purge for return to the process or for routing to the appropriate treatment system. Gases displaced during filling of the sample container are not required to be collected or captured.

B. Each closed-purge, closed loop, or closed-vent system, as required in Subsection A of this Section, shall meet one of the following requirements:

1. return the purged process fluid directly to the process line;

2. collect and recycle the purged process fluid; or

3. be designed and operated to capture and transport all the purged process fluid to a waste management unit that complies with the applicable requirements of LAC 33:V.1755-1759 or a control device that complies with the requirements of LAC 33:V.1735.

C. In situ sampling systems and sampling systems without purges are exempt from the requirements of Subsections A and B of this Section.

La. Admin. Code tit. 33, § V-1725

Promulgated by the Department of Environmental Quality, Office of Solid and Hazardous Waste, Hazardous Waste Division, LR 17:658 (July 1991), amended by the Office of Waste Services, Hazardous Waste Division, LR 24:1700 (September 1998).

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:2180 et seq.