La. Admin. Code tit. 33 § V-4541

Current through Register Vol. 50, No. 9, September 20, 2024

Section V-4541 - Inspections

A. The owner or operator of a treatment facility must inspect, where present:

1. discharge control and safety equipment (e.g., waste feed cut-off systems, by-pass systems, drainage systems, and pressure relief systems) at least once each operating day, to ensure good working order;

2. data gathered from monitoring equipment (e.g., pressure and temperature gauges), at least once each operating day, to ensure that the treatment process or equipment is being operated according to its design;

3. the construction materials of the treatment process or equipment, at least weekly, to detect corrosion or leaking of fixtures or seams; and

4. the construction materials of, and the area immediately surrounding, discharge confinement structures (e.g., dikes), at least weekly, to detect erosion or obvious signs of leakage (e.g., wet spots or dead vegetation).

B. As required by LAC 33:V.1509.C, the owner or operator must remedy any deterioration or malfunction he finds.

La. Admin. Code tit. 33, § V-4541

Promulgated by the Department of Environmental Quality, Office of Solid and Hazardous Waste, Hazardous Waste Division, LR 10:200 (March 1984).

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:2180 et seq.