La. Admin. Code tit. 33 § III-2199

Current through Register Vol. 50, No. 6, June 20, 2024

Section III-2199 - Appendix A and B

A. Appendix A

An industry is considered a synthetic organic chemical manufacturing industry (SOCMI), as defined in LAC 33:III.111, if it produces, as intermediates or final products, one or more of the chemicals listed in the following table.

Table 8 SOCMI Chemicals
CAS Noa	Chemical
105-57-7	Acetal
75-07-0	Acetaldehyde
107-89-1	Acetaldol
60-35-5	Acetamide
103-84-4	Acetanilide
64-19-7	Acetic acid
108-24-7	Acetic anhydride
67-64-1	Acetone
75-86-5	Acetone cyanohydrin
75-05-8	Acetonitrile
98-86-2	Acetophenone
75-36-5	Acetyl chloride
74-86-2	Acetylene
107-02-8	Acrolein
79-06-1	Acrylamide
79-10-7	Acrylic acid
107-13-1	Acrylonitrile
124-04-9	Adipic acid
111-69-3	Adiponitrile
(b)	Alkyl naphthalenes
107-18-6	Allyl alcohol
107-05-1	Allyl chloride
1321-11-5	Aminobenzoic acid
111-41-1	Aminoethylethanolamine
123-30-8	p-aminophenol
628-63-7, 123-92-2	Amyl acetates
71-41-0c	Amyl alcohols
110-58-7	Amyl amine
543-59-9	Amyl chloride
110-66-7c	Amyl mercaptans
1322-06-1	Amyl phenol
62-53-3	Aniline
142-04-1	Aniline hydrochloride
29191-52-4	Anisidine
100-66-3	Anisole
118-92-3	Anthranilic acid
84-65-1	Anthraquinone
100-52-7	Benzaldehyde
55-21-0	Benzamide
71-43-2	Benzene
98-48-6	Benzenedisulfonic acid
98-11-3	Benzenesulfonic acid
134-81-6	Benzil
76-93-7	Benzilic acid
65-85-0	Benzoic acid
119-53-9	Benzoin
100-47-0	Benzonitrile
119-61-9	Benzophenone
98-07-7	Benzotrichloride
98-88-4	Benzoyl chloride
100-51-6	Benzyl alcohol
100-46-9	Benzylamine
120-51-4	Benzyl benzoate
100-44-7	Benzyl chloride
98-87-3	Benzyl dichloride
92-52-4	Biphenyl
80-05-7	Bisphenol A
10-86-1	Bromobenzene
27497-51-4	Bromonaphthalene
106-99-0	Butadiene
106-98-9	1-butene
123-86-4	n-butyl acetate
141-32-2	n-butyl acrylate
71-36-3	n-butyl alcohol
78-92-2	s-butyl alcohol
75-65-0	t-butyl alcohol
109-73-9	n-butylamine
13952-84-6	s-butylamine
75-64-9	t-butylamine
98-73-7	p-tert-butyl benzoic acid
107-88-0	1,3-butylene glycol
123-72-8	n-butyraldehyde
107-92-6	Butyric acid
106-31-0	Butyric anhydride
109-74-0	Butyronitrile
105-60-2	Caprolactam
75-1-50	Carbon disulfide
558-13-4	Carbon tetrabromide
56-23-5	Carbon tetrachloride
9004-35-7	Cellulose acetate
79-11-8	Chloroacetic acid
108-42-9	m-chloroaniline
95-51-2	o-chloroaniline
106-47-8	p-chloroaniline
35913-09-8	Chlorobenzaldehyde
108-90-7	Chlorobenzene
118-91-2, 535-80-8, 74-11-3c	Chlorobenzoic acid
2136-81-4, 2136-89-2, 5216-25-1c	Chlorobenzotrichloride
1321-03-5	Chlorobenzoyl chloride
25497-29-4	Chlorodifluoromethane
75-45-6	Chlorodifluoroethane
67-66-3	Chloroform
25586-43-0	Chloronapthalene
88-73-3	o-chloronitrobenzene
100-00-5	p-chloronitrobenzene
25167-80-0	Chlorophenols
126-99-8	Chloroprene
7790-94-5	Chlorosulfonic acid
108-41-8	m-chlorotoluene
95-49-8	o-chlorotoluene
106-43-4	p-chlorotoluene
75-72-9	Chlorotrifluoromethane
108-39-4	m-cresol
95-48-7	o-cresol
106-44-5	p-cresol
1319-77-3	Mixed cresols
1319-77-3	Cresylic acid
4170-30-0	Crotonaldehyde
3724-65-0	Crotonic acid
98-82-8	Cumene
80-15-9	Cumene hydroperoxide
372-09-8	Cyanoacetic acid
506-77-4	Cyanogen chloride
108-80-5	Cyanuric acid
108-77-0	Cyanuric chloride
110-82-7	Cyclohexane
108-93-0	Cyclohexanol
108-94-1	Cyclohexanone
110-83-8	Cyclohexene
108-91-8	Cyclohexylamine
111-78-4	Cyclooctadiene
112-30-1	Decanol
123-42-2	Diacetone alcohol
27576-04-1	Diaminobenzoic acid
95-76-1, 95-82-9, 554-00-7, 608-27-5, 608-31-1, 626-43-7, 27134-27-6, 57311-92-9c	Dichloroaniline
541-73-1	m-dichlorobenzene
95-50-1	o-dichlorobenzene
106-46-7	p-dichlorobenzene
75-71-8	Dichlorodifluoromethane
111-44-4	Dichloroethyl ether
107-06-2	1,2-dichloroethane (EDC)
96-23-1	Dichlorohydrin
26952-23-8	Dichloropropene
101-83-7	Dicyclohexylamine
109-89-7	Diethylamine
111-46-6	Diethylene glycol
112-36-7	Diethylene glycol diethyl ether
111-96-6	Diethylene glycol dimethyl ether
112-34-5	Diethylene glycol monobutyl ether
124-17-7	Diethylene glycol monobutyl ether acetate
111-90-0	Diethylene glycol monoethyl ether
112-15-2	Diethylene glycol monoethyl ether acetate
111-77-3	Diethylene glycol monomethyl ether
64-67-5	Diethyl sulfate
75-37-6	Difluoroethane
25167-70-8	Diisobutylene
26761-40-0	Diisodecyl phthalate
27554-26-3	Diisooctyl phthalate
674-82-8	Diketene
124-40-3	Dimethylamine
121-69-7	N,N-dimethylaniline
115-10-6	N,N-dimethyl ether
68-12-2	N,N-dimethylformamide
57-14-7	Dimethylhydrazine
77-78-1	Dimethyl sulfate
75-18-3	Dimethyl sulfide
67-68-5	Dimethyl sulfoxide
120-61-6	Dimethyl terephthalate
99-34-3	3,5-dinitrobenzoic acid
51-28-5	Dinitrophenol
25321-14-6	Dinitrotoluene
123-91-1	Dioxane
646-06-0	Dioxilane
122-39-4	Diphenylamine
101-84-8	Diphenyl oxide
102-08-9	Diphenyl thiourea
25265-71-8	Dipropylene glycol
25378-22-7	Dodecene
28675-17-4	Dodecylaniline
27193-86-8	Dodecylphenol
106-89-8	Epichlorohydrin
64-17-5	Ethanol
141-43-5c	Ethanolamines
141-78-6	Ethyl acetate
141-97-9	Ethyl acetoacetate
140-88-5	Ethyl acrylate
75-04-7	Ethylamine
100-41-4	Ethylbenzene
74-96-4	Ethyl bromide
9004-57-3	Ethylcellulose
75-00-3	Ethyl chloride
105-39-5	Ethyl chloroacetate
105-56-6	Ethylcyanoacetate
74-85-1	Ethylene
96-49-1	Ethylene carbonate
107-07-3	Ethylene chlorohydrin
107-15-3	Ethylenediamine
106-93-4	Ethylene dibromide
107-21-1	Ethylene glycol
111-55-7	Ethylene glycol diacetate
110-71-4	Ethylene glycol dimethyl ether
111-76-2	Ethylene glycol monobutyl ether
112-07-2	Ethylene glycol monobutyl ether acetate
110-80-5	Ethylene glycol monoethyl ether
111-15-9	Ethylene glycol monoethyl ether acetate
109-86-4	Ethylene glycol monomethyl ether
110-49-6	Ethylene glycol monomethyl ether acetate
122-99-6	Ethylene glycol monophenyl ether
2807-30-9	Ethylene glycol monopropyl ether
75-21-8	Ethylene oxide
60-29-7	Ethyl ether
104-76-7	2-ethylhexanol
122-51-0	Ethyl orthoformate
95-92-1	Ethyl oxalate
41892-71-1	Ethyl sodium oxalacetate
50-00-0	Formaldehyde
75-12-7	Formamide
64-18-6	Formic acid
110-17-8	Fumaric acid
98-01-1	Furfural
56-81-5	Glycerol
26545-73-7	Glycerol dichlorohydrin
25791-96-2	Glycerol triether
56-40-6	Glycine
107-22-2	Glyoxal
118-74-1	Hexachlorobenzene
67-72-1	Hexachloroethane
36653-82-4	Hexadecyl alcohol
124-09-4	Hexamethylenediamine
629-11-8	Hexamethylene glycol
100-97-0	Hexamethylenetetramine
74-90-8	Hydrigen cyanide
123-31-9	Hydroquinone
99-96-7	p-hydroxybenzoic acid
26760-64-5	Isoamylene
78-83-1	Isobutanol
110-19-0	Isobutyl acetate
115-11-7	Isobutylene
78-84-2	Isobutyraldehyde
79-31-2	Isobutyric acid
25339-17-7	Isodecanol
26952-21-6	Isooctyl alcohol
78-78-4	Isopentane
78-59-1	Isophorone
121-91-5	Isophthalic acid
78-79-5	Isoprene
67-63-0	Isopropanol
108-21-4	Isopropyl acetate
75-31-0	Isopropylamine
75-29-6	Isopropyl chloride
25168-06-3	Isopropylphenol
463-51-4	Ketene
(b)	Linear alkyl sulfonate
123-01-3	Linear alkylbenzene (linear dodecylbenzene)
110-16-7	Maleic acid
108-31-6	Maleic anhydride
6915-15-7	Malic acid
141-79-7	Mesityl oxide
121-47-1	Metanilic acid
79-41-4	Methacrylic acid
563-47-3	Methallyl chloride
67-56-1	Methanol
79-20-9	Methyl acetate
105-45-3	Methyl acetoacetate
74-89-5	Methylamine
100-61-8	n-methylaniline
74-83-9	Methyl bromide
37365-71-2	Methyl butynol
74-87-3	Methyl chloride
108-87-2	Methylcyclohexane
1331-22-2	Methylcyclohexanone
75-09-2	Methylene chloride
101-77-9	Methylene dianiline
101-68-8	Methylene diphenyl diisocyanate
78-93-3	Methyl ethyl ketone
107-31-3	Methyl formate
108-11-2	Methyl isobutyl carbinol
108-10-1	Methyl isobutyl ketone
80-62-6	Methyl methacrylate
77-75-8	Methylpentynol
98-83-9	a-methylstyrene
110-91-8	Morpholine
85-47-2	a-naphthalene sulfonic acid
120-18-3	b-naphthalene sulfonic acid
90-15-3	a-naphthol
135-19-3	b-naphthol
75-98-9	Neopentanoic acid
88-74-4	o-nitroaniline
100-01-6	p-nitroaniline
91-23-6	o-nitroanisole
100-17-4	p-nitroanisole
98-95-3	Nitrobenzene
27178-83-2c	Nitrobenzoic acid (o, m, and p)
79-24-3	Nitroethane
75-52-5	Nitromethane
88-75-5	2-Nitrophenol
25322-01-4	Nitropropane
1321-12-6	Nitrotoluene
27215-95-8	Nonene
25154-52-3	Nonylphenol
27193-28-8	Octylphenol
123-63-7	Paraldehyde
115-77-5	Pentaerythritol
109-66-0	n-pentane
109-67-1	1-pentene
127-18-4	Perchloroethylene
594-42-3	Perchloromethyl mercaptan
94-70-2	o-phenetidine
]156-43-4	p-phenetidine
108-95-2	Phenol
98-67-9, 585-38-6, 609-46-1, 1333-39-7c	Phenolsulfonic acids
91-40-7	Phenyl anthranilic acid
(b)	Phenylenediamine
75-44-5	Phosgene
85-44-9	Phthalic anhydride
85-41-6	Phthalimide
108-99-6	b-picoline
110-85-0	Piperazine
9003-29-6, 25036-29-7c	Polybutenes
25322-68-3	Polyethylene glycol
25322-69-4	Polypropylene glycol
123-38-6	Propional dehyde
79-09-4	Propionic acid
71-23-8	n-propyl alcohol
107-10-8	Propylamine
540-54-5	Propyl chloride
115-07-1	Propylene
127-00-4	Propylene chlorohydrin
78-87-5	Propylene dichloride
57-55-6	Propylene glycol
75-56-9	Propylene oxide
110-86-1	Pyridine
106-51-4	Quinone
108-46-3	Resorcinol
27138-57-4	Resorcylic acid
69-72-7	Salicylic acid
127-09-3	Sodium acetate
532-32-1	Sodium benzoate
9004-32-4	Sodium carboxymethyl cellulose
3926-62-3	Sodium chloroacetate
141-53-7	Sodium formate
139-02-6	Sodium phenate
110-44-1	Sorbic acid
100-42-5	Styrene
110-15-6	Succinic acid
110-61-2	Succinonitrile
121-57-3	Sulfanilic acid
126-33-0	Sulfolane
1401-55-4	Tannic acid
100-21-0	Terephthalic acid
79-34-5c	Tetrachloroethanes
117-08-8	Tetrachlorophthalic anhydride
78-00-2	Tetraethyl lead
119-64-2	Tetrahydronapthalene
85-43-8	Tetrahydrophthalic anhydride
75-74-1	Tetramethyl lead
110-60-1	Tetramethylenediamine
110-18-9	Tetramethylethylenediamine
108-88-3	Toluene
95-80-7	Toluene-2,4-diamine
584-84-9	Toluene-2,4-diisocyanate
26471-62-5	Toluene diisocyanates (mixture)
1333-07-9	Toluenesulfonamide
104-15-4c	Toluenesulfonic acids
98-59-9	Toluenesulfonyl chloride
26915-12-8	Toluidines
87-61-6, 108-70-3, 120-82-1c	Trichlorobenzenes
71-55-6	1,1,1-trichloroethane
79-00-5	1,1,2-trichloroethane
79-01-6	Trichloroethylene
75-69-4	Trichlorofluoromethane
96-18-4	1,2,3-trichloropropane
76-13-1	1,1,2-trichloro-1,2,2-trifluoroethane
121-44-8	Triethylamine
112-27-6	Triethylene glycol
112-49-2	Triethylene glycol dimethyl ether
7756-94-7	Triisobutylene
75-50-3	Trimethylamine
108-05-4	Vinyl acetate
75-01-4	Vinyl chloride
75-35-4	Vinylidene chloride
25013-15-4	Vinyl toluene
1330-20-7	Xylenes (mixed)
956-47-6	o-xylene
106-42-3	p-xylene
1300-71-6	Xylenol
1300-73-8	Xylidine

^a CAS numbers refer to the Chemical Abstracts Registry numbers assigned to specific chemicals, isomers, or mixtures or chemicals. Some isomers or mixtures that are covered by the standards do not have CAS numbers assigned to them. The standards apply to all of the chemicals listed, whether CAS numbers have been assigned or not.

^b No CAS number(s) have been assigned to this chemical, its isomers, or mixtures containing these chemicals.

^c CAS numbers for some of the isomers are listed; the standards apply to all of the isomers and mixtures, even if CAS numbers have not been assigned.

B. Appendix B, Louisiana Consolidated Fugitive Emissions Program (LCFEP)

Through a memorandum of understanding signed in 1996, the Louisiana Department of Environmental Quality (LDEQ) entered into an agreement with the U.S. Environmental Protection Agency (EPA) Region 6 to administer a program titled the Louisiana Consolidated Fugitive Emissions Program (LCFEP). The agreement established guidelines for the consolidation of multiple leak detection and repair (LDAR) programs at industrial facilities into a single program. At facilities that are subject to multiple LDAR standards, LCFEP provides the option of consulting a prioritized stringency table of programs in order to determine the overall most stringent program applicable to the facility, and then administer that program solely in lieu of implementing all fugitive programs simultaneously.

Under the current agreements between EPA and LDEQ, and between LDEQ and individual facilities, participating industry conducts the most stringent LDAR program and submits a single report, greatly reducing the regulatory burden created by overlapping state and federal LDAR programs.

The governing memorandum of understanding states:

State and EPA Region 6 agree to implement and enforce fugitive emission program requirements in accordance with the Louisiana Fugitive Emission Program Consolidation Guidelines to provide a mechanism for consolidating overlapping state and federal equipment leak programs in agreement with the affected source. EPA Region 6 and the State accept federal and state enforceability of the consolidated program. The State and EPA Region 6 further agree that compliance with a consolidated program in accordance with the Guidelines will be considered compliance with each of the fugitive emission programs being consolidated. Furthermore, it is understood that an affected source's noncompliance with the consolidated program requirements may subject the affected source to enforcement action for one or more of the requirements of fugitive emissions programs being consolidated. This agreement will be implemented only through a Source Notice and Agreement signed by and specific to each affected source. If in the future, a new federal standard is promulgated (i.e., consolidated air rule, MACT, etc.) that could potentially change the established Guidelines, the Guidelines will be revisited and modified as necessary.

The Source Notice and Agreement (SNA) is a memorandum submitted by an interested facility which contains a detailed list of programs to be consolidated. Consolidation is done on either a unit-by-unit or a facility-wide basis. The SNA is required to be signed by a facility representative meeting EPA's responsible official designation, defined under 40 CFR 63.2. Once the SNA is signed by the facility and accepted by LDEQ, the agreement is considered to be in effect for compliance purposes. SNAs are accepted or denied based on the correctness of the consolidation table, and the signature of a proper representative.

Facilities operating a consolidated fugitive program must abide by the program's consolidation guidelines. The guidelines consist of a set of rules called the workpractice terms and conditions and the stringency table (Table 9).

Louisiana Fugitive Emission Program Consolidation Guidelines

Workpractice Terms and Conditions

These terms and conditions are to be used in conjunction with the stringency table (Table 9). Of the applicable equipment leak programs being consolidated, the program highest in the table hierarchy is to be considered the overall most stringent program under the guidelines. The guidelines may be used only in accordance with a SNA or a Title V permit.

Applicability and Exemptions

The consolidated program shall apply to the combined universe of components subject to any of the programs being consolidated.

The consolidation of fugitive programs shall be conducted at a minimum of the process unit level, and may also be on a facility-wide basis.

Consolidation of RCRA programs shall first be approved by LDEQ's Waste Permits Division.

Component types which do not require periodic monitoring under the overall most stringent program, shall be monitored as required by the most stringent requirements of any other program being consolidated and will not be exempted.

The consolidated program shall include any exemptions based on size of component available in any of the programs being consolidated.

The consolidated program cannot be used to replace requirements for area monitoring under the Vinyl Chloride NESHAP.

For any compressor subject to a federal rule requiring a seal system including barrier fluid, sensor, and alarm, periodic monitoring of compressors may not be used in lieu of the seal system requirements, regardless of the overall most stringent program.

Leak Definitions

Leak definitions are based on the overall most stringent program as determined from Table 9.

Phase-in periods allowed under federal regulations are not eliminated as long as there is no backsliding of existing monitoring programs.

Monitoring Frequency

Monitoring frequency shall be based on the overall most stringent program as determined from Table 9.

Annual monitoring shall be defined as once every four quarters, regardless of the overall most stringent program. Some allowance may be made in the first year of the consolidation in order to allow for transition from existing monitoring schedules.

Calibration

Use of dilution device for calibration, as defined in Method 21, is acceptable.

Identification of Components

All leaking components must be tagged.

If the Benzene NESHAP and a more stringent program are applicable, the overall most stringent program prevails and physical tagging of components is therefore not required. Identification, either by list or location (area or group) of affected components is acceptable.

Leak Performance

The determination of leak performance is based on the overall most stringent program as determined from Table 9.

Repair

Repair period requirements are always first attempt within 5 days of detecting the leak and final repair within 15 days of detecting the leak, regardless of the overall most stringent program.

Post Repair

Post repair inspection consists of remonitoring once within 3 months after repair of leaks, regardless of the overall most stringent program.

Recordkeeping and Reporting

Recordkeeping and reporting information requirements shall be based on the overall most stringent program as determined from Table 9.

Reporting frequency shall be semiannual regardless of the overall most stringent program.

Reports shall include records for any monitoring performed within the semiannual reporting period.

Louisiana Consolidated Fugitive Emission Program Stringency Table

Stringency Table (Table 9)

This stringency table is to be used in conjunction with the workpractice terms and conditions. Consolidation is done between the groups listed. Of the applicable equipment leak programs being consolidated, the program in the highest group in the table hierarchy is to be considered the overall most stringent program under the guidelines. Referencing Subparts shall comply with the referenced program in the manner required by the provisions of the referencing Subpart. The guidelines may be used only in accordance with a SNA or a Title V permit. Programs shall be consolidated on a unit-wide or a facility-wide basis.

Table 9 Stringency Table

40 CFR 65 Subpart F - Consolidated Air Rule

40 CFR 63 Subpart H - SOCMI HON MACT and Referencing Subparts 40 CFR 63 Subpart EEEE - Organic Liquids Distribution (Non-Gasoline) MACT (HON Option) 40 CFR 63 Subpart UUUU - Cellulose Products MACT (HON Option) 40 CFR 63 Subpart W - Polymers and Resins II MACT 40 CFR 63 Subpart PPP - Polyether Polyols Production MACT

40 CFR 63 Subpart UU - General MACT for Equipment Leaks-Control Level II and Referencing Subparts 40 CFR 63 Subpart YY-Generic MACT (Acetal Resins Production, Acrylic and Modacrylic Fibers Production, Cyanide Chemicals Manufacturing, Polycarbonates Production, Ethylene Processes) (UU Option) 40 CFR 63 Subpart OOO-Amino/Phenolic Resins Manufacturing MACT 40 CFR 63 Subpart EEEE-Organic Liquids Distribution (Non-Gasoline) MACT (Subpart UU Option) 40 CFR 63 Subpart FFFF-Miscellaneous Organic Chemical Manufacturing (Subpart UU Option) 40 CFR 63 Subpart UUUU-Cellulose Products MACT (Subpart UU Option) 40 CFR 63 Subpart GGGGG-Site Remediation MACT (Subpart UU Option) 40 CFR 63 Subpart HHHHH-Miscellaneous Coating Manufacturing MACT (Subpart UU Option)

40 CFR 63 Subpart U-Polymers and Resins I, Elastomer MACT

40 CFR 63 Subpart GGG-Pharmaceuticals Production MACT 40 CFR 63 Subpart MMM-Pesticide Active Ingredient Production MACT

Louisiana MACT Determination for Non-HON Sources w/ Consent Decree Enhancements Louisiana MACT Determination for Refineries w/ Consent Decree Enhancements

40 CFR 60 Subpart VVa-NSPS for Equipment Leaks In SOCMI Facilities 40 CFR 60 Subpart GGGa-NSPS for Equipment Leaks in Petroleum Refineries

Louisiana MACT Determination for Non-HON Sources Louisiana MACT Determination for Refineries

LAC 33:III.2122-Louisiana Fugitive Emission Control for Nonattainment

40 CFR 63 Subpart CC-Refining MACT Modified HON option

40 CFR 61 Subpart F-National Emission Standard for Vinyl Chloride 40 CFR 61 Subpart V-National Emission Standard for Equipment Leaks and Referencing Subparts 40 CFR 61 Subpart J-National Emission Standard for Equipment Leaks of Benzene 40 CFR 63 Subpart HH-Oil and Natural Gas Production MACT

40 CFR 60 Subpart VV-NSPS for Equipment Leaks In SOCMI Facilities 40 CFR 60 Subpart GGG-NSPS for Equipment Leaks in Petroleum Refineries 40 CFR 60 Subpart KKK-NSPS for Equipment Leaks in Onshore Natural Gas Processing Plants 40 CFR 63 Subpart CC-Refinery MACT NSPS Option

40 CFR 63 Subpart TT-General MACT for Equipment Leaks-Control Level I and Referencing Subparts 40 CFR 63 Subpart EEEE-Organic Liquids Distribution (Non-Gasoline) MACT (Subpart TT Option) 40 CFR 63 Subpart FFFF-Miscellaneous Organic Chemical Production and Processes MACT (Subpart TT Option) 40 CFR 63 Subpart GGGGG-Site Remediation MACT (Subpart TT Option) 40 CFR 63 Subpart HHHHH-Miscellaneous Coating Manufacturing MACT (Subpart TT Option) 40 CFR 63 Subpart YY-Generic MACT (Acetal Resins Production, Acrylic and Modacrylic Fibers Production, Cyanide Chemicals Manufacturing, and Polycarbonates Production) (TT Option)

40 CFR 264 -RCRA Subpart BB (LAC 33:V.1717.Subchapter B) 40 CFR 265 -RCRA Subpart BB (LAC 33:V.4561.Subchapter R)

LAC 33:III.2121-Louisiana Fugitive Emission Control 40 CFR 63 Subpart III-Flexible Polyurethane Foam Production MACT

40 CFR 63 Subpart R-Gasoline Distribution Terminals MACT and Referencing Subpart 40 CFR 63 Subpart HHHHH-Miscellaneous Coating Manufacturing MACT (Subpart R Option) 40 CFR 63 Subpart YY-Generic MACT (Hydrogen Fluoride Manufacturing)

La. Admin. Code tit. 33, § III-2199

Promulgated by the Department of Environmental Quality, Office of Air Quality and Nuclear Energy, LR 11:529 (May 1985) amended by the Office of Air Quality and Radiation Protection, Air Quality Division, LR 17:654 (July 1991), LR 23:1508 (November 1997), amended by the Office of the Secretary, Legal Division, LR 39:2250 (August 2013).

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:2054.