La. Admin. Code tit. 28 § CV-1713

Current through Register Vol. 50, No. 11, November 20, 2024

Section CV-1713 - Conduit, Raceways, Panelboards and Switchboards

A. Terms Associated with Conduits and Raceways

B. Conduit and Wiring Support Systems Recognized by Code:

1. select appropriate conduit type;

2. select and utilize appropriate connectors;

3. select and utilize appropriate fastening devices and reinforcements;

4. special considerations.

C. Procedures for Laying out Various Types of Bends:

1. take-up and gain;

2. kicks and offsets;

3. calculate degrees;

4. back-to-back bends;

5. determine overall length of conduit for specific situations;

6. locating bending points;

7. four techniques for segment bending;

8. techniques and operations for making concentric bends;

9. radius of circle.

D. Procedures for Making Bends when Fabricating Conduits:

1. hand benders to make on small diameter conduit;

2. power benders to make bends on larger diameter pipe:

a. make offset using "constants" or "shrink" methods;

b. make bends in proper sequence, direction and with necessary accuracy.

E. Fabricating Raceways and Wiring Support Systems

F. Cable Assembly Wiring Method Recognized by the Code:

1. installation of panels;

2. installation of components;

3. wiring and connections;

4. special considerations and occupancies.

La. Admin. Code tit. 28, § CV-1713

Promulgated by the Department of Education, Board of Elementary an d Secondary Education, Trade and Industrial Education, LR 32:577 (April 2006).

AUTHORITY NOTE: Promulgated in accordance with R.S. 17:6(A)(10) and R.S. 17:10.