803 Ky. Admin. Regs. 2:316
Current through Register Vol. 51, No. 5, November 1, 2024
Section 803 KAR 2:316 - Welding, cutting, and brazingRELATES TO: KRS 338.051, 338.061, 29 C.F.R. 1910.251-1910.255
NECESSITY, FUNCTION, AND CONFORMITY: KRS 338.051(3) requires the Kentucky Occupational Safety and Health Standards Board to promulgate occupational safety and health administrative regulations and authorizes the chairman to reference federal standards without board approval if necessary to meet federal time requirements. KRS 338.061 authorizes the board to establish, modify, or repeal standards and reference federal standards. This administrative regulation establishes the welding, cutting, and brazing standards that are enforced by the Department of Workplace Standards in general industry.
Section 1. Definitions. (1) "Act" means KRS Chapter 338.(2) "Assistant secretary" means Secretary of Labor, Commonwealth of Kentucky, or Commissioner, Department of Workplace Standards, Labor Cabinet.(3) "C.F.R." means Code of Federal Regulations.(4) "Employee" is defined by KRS 338.015(2).(5) "Employer" is defined by KRS 338.015(1).(6) "Standard" means "occupational safety and health standard" as defined by KRS 338.015(3).(7) "U.S. Department of Labor" means Kentucky Labor Cabinet, 500 Mero Street, 3rd Floor, Frankfort, Kentucky 40601, or the U.S. Department of Labor.Section 2. Except as modified by the definitions in Section 1 of this administrative regulation, general industry shall comply with the federal requirements published by the Office of the Federal Register, National Archives and Records Services, General Services Administration 29 C.F.R. 1910.251-1910.255.16 Ky.R. 698; eff. 12-15-1989; 17 Ky.R. 1851; eff. 1-6-1991; 23 Ky.R. 1720; eff. 12-13-1996; 25 Ky.R. 1159; eff. 1-19-1999; 33 Ky.R. 1721; 2301; eff. 3-9-2007; 35 Ky.R. 1300; 1757; eff. 3-6-2009; 37 Ky.R. 151; eff. 10-1-2010; 38 Ky.R. 2025; eff. 8-31-2012; 46 Ky.R.2834; 47 Ky.R. 318; eff. 11-4-2020.STATUTORY AUTHORITY: KRS 338.051, 338.061