Kan. Admin. Regs. § 99-25-4

Current through Register Vol. 43, No. 24, June 13, 2024

Section 99-25-4 - Continuing education requirements for technical representatives

(a) Before the license of a technical representative is issued or renewed by the Kansas department of agriculture, the technical representative shall complete a minimum of four clock-hours of verifiable continuing education for each category of weighing or measuring devices. The continuing education shall consist of educational seminars regarding the following topics:

(1) The installation, calibration, or repairing of a weighing or measuring device;

(2) the applicable state weights and measures laws or regulations;

(3) the applicable handbooks adopted by reference in these regulations;

(4) the information required on testing and reporting forms; and

(5) the proper method for testing weights and measures and weighing and measuring devices.

(b) All training or continuing education not conducted by the Kansas department of agriculture or representatives of the department shall be approved by the secretary before the training or continuing education is applied toward the requirements for continuing education.

Kan. Admin. Regs. § 99-25-4

Authorized by K.S.A. 83-207 and K.S.A. 2000 Supp. 55-442; implementing K.S.A. 2000 Supp. 55-442, K.S.A. 83-302, as amended by L. 2001, Ch. 5, Sec. 483, and K.S.A. 83-402, as amended by L. 2001, Ch. 5, Sec. 484; effective March 6, 1998; amended Jan. 18, 2002.