Kan. Admin. Regs. § 49-51-12

Current through Register Vol. 43, No. 24, June 13, 2024

Section 49-51-12 - Repairs and renewals of boiler and pressure vessel fittings and appliances

If repairs are made to any fittings or appliances of a boiler or pressure vessel or if it becomes necessary to replace them, the repairs or replacements shall meet the provisions of the following standards:

(a) ASME code sections I and VIII, as adopted in K.A.R. 49-45-1, K.A.R. 49-45-29, K.A.R. 49-45-30, and K.A.R. 49-45-31;

(b) ASME B 31.1, as adopted in K.A.R. 49-45-28;

(c) ASME CSD-1, as adopted in K.A.R. 49-45-27;

(d) NFPA sections 85, 85A, 85F, and 86, as adopted in K.A.R. 49-45-37, K.A.R. 49-45-38, K.A.R. 49-45-39, K.A.R. 49-45-40; and

(e) the national board inspection code, as adopted in K.A.R. 49-45-20.

Kan. Admin. Regs. § 49-51-12

Authorized by and implementing K.S.A. 44-916; effective May 1, 1987; amended April 28, 2000; amended Nov. 3, 2006.