Kan. Admin. Regs. § 112-110-10
Current through Register Vol. 44, No. 2, January 9, 2025
Section 112-110-10 - Central computer system manuals(a) Each CCS supplier shall provide the following manuals and diagrams for the CCS: (3) CCS architecture diagrams; and(4) other circuit diagrams.(b) The required service manuals shall meet the following requirements:(1) Accurately depict the CCS that the manual is intended to cover;(2) provide adequate detail and be sufficiently clear in their wording and diagrams to enable a qualified repairperson to perform repair and maintenance in a manner that is conducive to the long-term reliability of the CCS;(3) include maintenance schedules outlining the elements of the EGM that require maintenance and the frequency at which that maintenance should be carried out; and(4) include maintenance checklists that enable EGM maintenance staff to make a record of the work performed and the results of the inspection.(c) The required CCS architecture diagrams shall meet the following requirements:(1) Accurately depict the CCS that the diagrams are intended to cover;(2) provide adequate detail and be sufficiently clear in their wording and depiction to enable qualified technical staff to perform an evaluation of the design of the component; and(3) be professionally drafted in order to meet the requirements specified in this subsection. Kan. Admin. Regs. § 112-110-10
Authorized by K.S.A. 2007 Supp. 74-8772; implementing K.S.A. 2007 Supp. 74-8749 and 74-8772; effective May 1, 2009.