Iowa Admin. Code r. 875-71.9

Current through Register Vol. 47, No.14, January 8, 2025

Rule 875-71.9 - [Effective 2/12/2025] Alteration permits-requirements

(1) Alteration will not begin until an alteration permit has been issued by the department.

(2) Application for an alteration permit will be in the format required by the director and will include scope of work, drawings and specifications of all planned changes and the fee.

(3) Issuance of an alteration permit is not a waiver of any requirement of law.

(4) The alteration permit or a copy of the alteration permit will be conspicuously posted at the worksite.

(5) If a complete installation permit application was submitted for a CPH pursuant to subrule 71.5(3), at least seven days' advance notice of each CPH jump will be provided to the director.

(6) The alteration permit expires upon the earlier of the completion of the alteration as described in the permit application or one year after issuance. However, during the tenth month after issuance and upon submission to the director of the fee set forth in this chapter, sufficient justification, and other required information, the director may grant an extension of the alteration permit.

Iowa Admin. Code r. 875-71.9

ARC 7840B, IAB 6/17/09, effective 7/22/09; ARC 9221B, IAB 11/17/10, effective 12/22/10; ARC 0685C, IAB 4/17/2013, effective 5/22/2013

Amended by IAB January 6, 2016/Volume XXXVIII, Number 14, effective 2/10/2016

Amended by IAB April 21, 2021/Volume XLIII, Number 22, effective 6/1/2021

Adopted by IAB January 8, 2025/Volume XLVII, Number 14, effective 2/12/2025