865 Ind. Admin. Code 1-7-1

Current through October 31, 2024

Section 865 IAC 1-7-1 - Design and contents of seal

Authority: IC 25-21.5-2-14

Affected: IC 25-21.5

Sec. 1.

(a) The land surveyor seal shall be not less than one and five-eighths (1e) inches or more than one and seven-eighths (1 7/8) inches in outside diameter, using the following

Click here to view Image

(b) The seal may:

(1) be:

(A) embossed;

(B) stamped; or

(C) electronically applied;

in conformance with the design as shown in subsection (a); and

(2) have:

(A) a milled edge, as shown in subsection (a); or

(B) two (2) concentric circles with the outer and inner circles corresponding with the respective edges of the milling.

(c) The name and registration number of the registrant inscribed on the seal shall correspond to the name and certificate number inscribed on the certificate of registration.

865 IAC 1-7-1

State Board of Registration for Land Surveyors; Rule 7, Sec 2; filed Feb 29, 1980, 3:40 p.m.: 3 IR 632; filed Oct 17, 1986, 2:20 p.m.: 10 IR 441; filed Oct 13, 1992, 5:00 p.m.: 16 IR 878; readopted filed May 22, 2001, 9:55 a.m.: 24 IR 3237; filed May 4, 2006, 1:25 p.m.: 29 IR 3004; readopted filed Nov 9, 2012, 11:26 a.m.: 20121205-IR-865120390RFA

Readopted filed 11/29/2018, 10:35 a.m.: 20181226-IR-865180404RFA

Readopted filed 5/30/2024, 9:42 a.m.: 20240626-IR-865230820RFA

864 IAC 1.1-7-2 was renumbered by Legislative Services Agency as 865 IAC 1-7-1.