75 Ind. Admin. Code 4-2-10

Current through October 2, 2024

Section 75 IAC 4-2-10 - Number of dealer, manufacturer, or interim plates

Authority: IC 9-14-2-2

Affected: IC 9-23; IC 9-29

Sec. 10.

(a) The maximum number of dealer plates issued under this section is determined under STEP THREE of the following formula:

STEP ONE: Determine the total number of vehicles (both retail and wholesale) sold, or projected sold, by the applicant in a license year.

STEP TWO: Determine the number of licensed months the applicant was in business during the license year.

STEP THREE: Divide the number in STEP ONE by the number in STEP TWO. For example, a total annual sales of one hundred twenty (120) divided by twelve (12) months equals ten (10) plates.

(b) The maximum number of manufacturer plates issued under this section is determined under STEP THREE of the following formula:

STEP ONE: Determine the total number of vehicles evaluated or tested under any type of evaluation or testing program or under the control of the manufacturer for which property taxes were assessed.

STEP TWO: Determine the number of licensed months the manufacturer was in business during the license year.

STEP THREE: Divide the number in STEP ONE by the number in STEP TWO. For example, a total evaluated or tested vehicles per year of one thousand two hundred (1,200) divided by twelve (12) equals one hundred (100) plates.

(c) A manufacturer applying for manufacturer plates under subsection (b) must file a report with the secretary of state each year stating the ratio of vehicles tested per vehicles manufactured as a condition of approval of the application. The report of the ratio must include the following:

(1) The total number of vehicles manufactured per year.

(2) The total number of vehicles evaluated or tested per year.

(3) The number of vehicles for which property taxes were assessed.

(4) A detailed listing of how the plates are to be distributed to any of its licensed factory branches or divisions.

A report of product evaluation program identifying all product evaluation vehicles, designees, and manufacturer plate assignments must be filed by the manufacturer or its subsidiary division on a quarterly basis. Manufacturer plates issued under subsection (b) shall be distributed to its subsidiary divisions or factory branches as indicated on the report of ratio.

(d) The secretary of state may limit the number of plates issued to any licensed location or licensee.

(e) The secretary of state may determine the number of interim plates issued based upon:

(1) the number of vehicles sold; or

(2) the dealer's or manufacturer's projected sales.

75 IAC 4-2-10

Secretary of State; 75 IAC 4-2-10; filed Jan 5, 1994, 5:00 p.m.: 17 IR 977; readopted filed Jul 30, 2001, 10:26 a.m.: 24 IR 4229; readopted filed Nov 14, 2007, 1:30 p.m.: 20071212-IR-140070563RFA; errata filed Jul 22, 2013, 10:52 a.m.: 20130807-IR-075130343ACA; readopted filed Nov 13, 2013, 3:25 p.m.: 20131211-IR-075130451RFA

Transferred from the Bureau of Motor Vehicles ( 140 IAC 3.5-2-12) to the Secretary of State ( 75 IAC 4-2-10) by P.L. 106-2008, SECTION 54, effective July 1, 2008.