Section 68 IAC 14-9-3 - Big Six wheel requirementsAuthority: IC 4-33-4
Affected: IC 4-33
Sec. 3.
(a) The Big Six wheel shall meet the following requirements: (1) Be circular in shape.(2) Be no less than five (5) feet in diameter.(3) The rim shall be divided as follows into fifty-four (54) equally spaced sections covered with glass:(A) Twenty-three (23) sections shall contain a one dollar ($1) bill or insignia.(B) Fifteen (15) sections shall contain a two dollar ($2) bill or insignia.(C) Eight (8) sections shall contain a five dollar ($5) bill or insignia.(D) Four (4) sections shall contain a ten dollar ($10) bill or insignia.(E) Two (2) sections shall contain a twenty dollar ($20) bill or insignia.(F) One (1) section shall contain a picture of a joker.(G) One (1) section shall contain a logo or design approved by the executive director in accordance with 68 IAC 14-1.(b) The Big Six wheel shall display an external registration tag and number issued by the commission.(c) Any other requirements deemed necessary by the executive director or the commission to ensure: (1) compliance with the Act and this title; and(2) the integrity of the games.Indiana Gaming Commission; 68 IAC 14-9-3; filed Jul 3, 1996, 5:00 p.m.: 19 IR 3041; readopted filed Nov 25, 2002, 10:11 a.m.: 26 IR 1261; readopted filed Nov 14, 2008, 12:51 p.m.: 20081210-IR-068080730RFA; filed Apr 25, 2012, 3:47 p.m.: 20120523-IR-068110275FRAReadopted filed 9/19/2018, 4:09 p.m.: 20181017-IR-068180283RFAReadopted filed 11/22/2023, 8:28 a.m.: 20231220-IR-068230610RFA