Section 675 IAC 18-1.6-12 - Adoption by reference; ASME B16.51Authority: IC 22-13-2-2
Affected: IC 22-12-7; IC 22-13; IC 22-14; IC 36-8-17
Sec. 12.
(a) That certain document being titled ASME B16.51, Copper and Copper Alloy Press-Connect Pressure Fittings, 2011 edition, as published by The American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990, is hereby adopted by reference as if fully set out in this rule save and except those revisions made in this rule.(b) Amend Table 1202.5 to insert, after "Copper and copper alloys standards", "ASME B16.51 2011".(c) Amend Section 13 by deleting, in the first sentence, "The manufacturer of press" and inserting "Press".(d) Amend Section 14.1 to delete the first sentence and insert to read as follows: Test reports demonstrating compliance with this Standard shall be provided to the code official upon request.(e) Amend Figure 1 Method of Designating Laying Lengths of Fittings and Openings of Reducing Fittings, GENERAL NOTES: (d) to insert, after "shall be", "as".(f) Amend Table 1 Dimensions of Press-Connect Ends, GENERAL NOTES: (c) to insert, after "shall be", "as".(g) Amend Mandatory Appendix I, Table I-1 Dimensions of Press-Connect Ends, GENERAL NOTES: (c) to insert, after "shall be", "as".(h) Amend Mandatory Appendix II, References as follows:(1) Delete the second sentence in its entirety without substitution.(2) Insert, after "ANSI/ASME B1.20.1, Pipe Threads, General Purpose (Inch)", "Edition: 13, Date: 11/15/13".(3) Insert, after "ASME B4.4M, Inspection of Workpieces", "Edition 81, Date: 1994".Filed 8/1/2014, 11:20 a.m.: 20140827-IR-675130340FRA, eff 12/1/2014Readopted filed 8/6/2020, 2:04 p.m.: 20200902-IR-675200309RFA