Rule 675 IAC 14-4.4 - 2020 Indiana Residential Code
- Section 675 IAC 14-4.4-1 - Adoption by reference; title; purpose
- Section 675 IAC 14-4.4-2 - Chapter 1; scope and administration
- Section 675 IAC 14-4.4-3 - Section R202; definitions
- Section 675 IAC 14-4.4-4 - Section R301.2.1.4; exposure category
- Section 675 IAC 14-4.4-5 - Table R301.2(1); climatic and geographical design criteria
- Section 675 IAC 14-4.4-6 - Section R301.2.2.1; determination of seismic design category
- Section 675 IAC 14-4.4-7 - Section R302.1; exterior walls
- Section 675 IAC 14-4.4-8 - Section R302.5.1; opening protection
- Section 675 IAC 14-4.4-9 - Section R302.11; fireblocking
- Section 675 IAC 14-4.4-10 - Section R302.13; fire protection of floors
- Section 675 IAC 14-4.4-11 - Section R303.8; exterior stairway illumination
- Section 675 IAC 14-4.4-12 - Section R309; garages and carports
- Section 675 IAC 14-4.4-13 - Section R310.1; emergency escape and rescue opening required
- Section 675 IAC 14-4.4-14 - Section R311.3.1; floor elevations at the required egress doors
- Section 675 IAC 14-4.4-15 - Section R311.3.2; floor elevations at other exterior doors
- Section 675 IAC 14-4.4-16 - Section R311.7.5.1; risers
- Section 675 IAC 14-4.4-17 - Section R311.7.5.2; treads
- Section 675 IAC 14-4.4-18 - Section R311.7.6; landings for stairways
- Section 675 IAC 14-4.4-19 - Section R311.7.8.4; continuity
- Section 675 IAC 14-4.4-20 - Section R312; guards
- Section 675 IAC 14-4.4-21 - Section R313; automatic fire sprinkler systems
- Section 675 IAC 14-4.4-22 - Section R314.2.2; alterations, repairs, and systems replacement
- Section 675 IAC 14-4.4-23 - Section R314.3; location
- Section 675 IAC 14-4.4-24 - Section R314.3.2; prohibited smoke alarm locations
- Section 675 IAC 14-4.4-25 - Section R314.3.3; installation requirements
- Section 675 IAC 14-4.4-26 - Section R314.8; visible notification appliances
- Section 675 IAC 14-4.4-27 - Section R315.2.2; alterations, repairs, and systems replacement
- Section 675 IAC 14-4.4-28 - Section R317.1.1; reserved
- Section 675 IAC 14-4.4-29 - Section R318.1.2; field treatment
- Section 675 IAC 14-4.4-30 - Section R322.1; general
- Section 675 IAC 14-4.4-31 - Section R322.1.4; establishing the design flood elevation
- Section 675 IAC 14-4.4-32 - Section R322.1.4.1; determination of design flood elevations
- Section 675 IAC 14-4.4-33 - Section R322.1.4.2; determination of impacts
- Section 675 IAC 14-4.4-34 - Section R322.1.6; protection of mechanical and electrical systems
- Section 675 IAC 14-4.4-35 - Section R322.1.8; flood resistant materials
- Section 675 IAC 14-4.4-36 - Section R322.2.1; elevation requirements
- Section 675 IAC 14-4.4-37 - Section R322.3.2; elevation requirements
- Section 675 IAC 14-4.4-38 - Section R326; swimming pools, spas, and hot tubs
- Section 675 IAC 14-4.4-39 - Section R401.3; drainage
- Section 675 IAC 14-4.4-40 - Section R403.1; general
- Section 675 IAC 14-4.4-41 - Table R403.4; minimum depth (D) and width (W) of crushed stone footings a, b (inches)
- Section 675 IAC 14-4.4-42 - Section R403.1.1.1; size of footings supporting piers and columns
- Section 675 IAC 14-4.4-43 - Section R403.1.4.1; frost protection
- Section 675 IAC 14-4.4-44 - Section R403.1.6; foundation anchorage
- Section 675 IAC 14-4.4-45 - Section R403.1.7.3; foundation elevation
- Section 675 IAC 14-4.4-46 - Table R403.2; size of footings supporting piers and columns
- Section 675 IAC 14-4.4-47 - Table R404.1.2(8); minimum vertical reinforcement for 6, 8, 10, and 12 inch nominal flat basement walls [b, c, d, e, f, h, i, k, n, o]
- Section 675 IAC 14-4.4-48 - Section R404.1.3.2; reinforcement for foundation walls
- Section 675 IAC 14-4.4-49 - Section R404.1.3.3.7.2; location of reinforcement in wall
- Section 675 IAC 14-4.4-50 - Section R404.2.1; identification
- Section 675 IAC 14-4.4-51 - Section R405.2.3; drainage system
- Section 675 IAC 14-4.4-52 - Section R407.3; structural requirements
- Section 675 IAC 14-4.4-53 - Section R408.1; ventilation
- Section 675 IAC 14-4.4-54 - Section R408.3; unvented crawlspace
- Section 675 IAC 14-4.4-55 - Section R408.4; access
- Section 675 IAC 14-4.4-56 - Section R408.8; under-floor drainage
- Section 675 IAC 14-4.4-57 - Section R502.1.1; sawn lumber
- Section 675 IAC 14-4.4-58 - Section R502.6.2; joist framing
- Section 675 IAC 14-4.4-59 - Figure R502.8; cutting, notching, and drilling
- Section 675 IAC 14-4.4-60 - Section R502.8.1; sawn lumber (drilling)
- Section 675 IAC 14-4.4-61 - Table R502.3.3(2); cantilever spans for floor joists supporting exterior balcony [a, b, e, f, g, h]
- Section 675 IAC 14-4.4-62 - Section R502.11.1; design (trusses)
- Section 675 IAC 14-4.4-63 - Section R502.11.4; truss design drawings
- Section 675 IAC 14-4.4-64 - Section R503.2.1; identification and grade
- Section 675 IAC 14-4.4-65 - Section R503.3.1; identification and grade (particleboard)
- Section 675 IAC 14-4.4-66 - Section R505.1.3; floor trusses
- Section 675 IAC 14-4.4-67 - Section R507.2.1; wood materials
- Section 675 IAC 14-4.4-68 - Section R507.4; deck post height a
- Section 675 IAC 14-4.4-69 - Section R507.4.1; deck post to deck footing connection
- Section 675 IAC 14-4.4-70 - Section R602.1.1; sawn lumber (walls)
- Section 675 IAC 14-4.4-71 - Table 602.3.2; Single top-plate splice connection details
- Section 675 IAC 14-4.4-72 - Table 602.7(1); girder spans a and header spans a for exterior bearing walls
- Section 675 IAC 14-4.4-73 - Section R602.10.9; braced wall panel support
- Section 675 IAC 14-4.4-74 - Section R604.1; identification and grade
- Section 675 IAC 14-4.4-75 - Section R605.1; identification and grade (particleboard)
- Section 675 IAC 14-4.4-76 - Section R606.3.5.2; cleanouts
- Section 675 IAC 14-4.4-77 - Section R702.7.2; material vapor retarder class
- Section 675 IAC 14-4.4-78 - Table R703.8.4(1); tie attachment and airspace requirements
- Section 675 IAC 14-4.4-79 - Section R703.8.6; drained cavity
- Section 675 IAC 14-4.4-80 - Section R802.1.1; sawn lumber
- Section 675 IAC 14-4.4-81 - Section R802.10.1; truss design drawings
- Section 675 IAC 14-4.4-82 - Section R803.2.1; identification and grade
- Section 675 IAC 14-4.4-83 - Section R806.1; ventilation required
- Section 675 IAC 14-4.4-84 - Section R902.4 rooftop-mounted photovoltaic panel systems
- Section 675 IAC 14-4.4-85 - Section R905.2.6; attachment
- Section 675 IAC 14-4.4-86 - Section R905.2.8; flashing
- Section 675 IAC 14-4.4-87 - Section R905.2.8.4; other flashing
- Section 675 IAC 14-4.4-88 - Figure R1003.9; termination
- Section 675 IAC 14-4.4-89 - Section N1101.5; construction documents
- Section 675 IAC 14-4.4-90 - Section N1101.6; defined terms
- Section 675 IAC 14-4.4-91 - Table N1102.1.2; insulation and fenestration requirements by component [a]
- Section 675 IAC 14-4.4-92 - Table N1102.1.4; equivalent U-factors [a]
- Section 675 IAC 14-4.4-93 - Table N1102.2.6; steel frame ceiling, wall and floor insulation R-values
- Section 675 IAC 14-4.4-94 - Section N1102.4.1.1; installation
- Section 675 IAC 14-4.4-95 - Section N1102.4.1.2; verification
- Section 675 IAC 14-4.4-96 - Section N1103.3.1; insulation (prescriptive)
- Section 675 IAC 14-4.4-97 - Section N1103.3.3; duct testing (mandatory)
- Section 675 IAC 14-4.4-98 - Section N1103.3.4; duct leakage (prescriptive)
- Section 675 IAC 14-4.4-99 - Section N1103.3.5; building cavities (mandatory)
- Section 675 IAC 14-4.4-100 - Section N1103.6; mechanical ventilation (mandatory)
- Section 675 IAC 14-4.4-101 - Section N1105.3; performance based compliance
- Section 675 IAC 14-4.4-102 - Section N1105.4.2; compliance report
- Section 675 IAC 14-4.4-103 - Table N1105.5.2(1); specifications for the standard reference and proposed designs
- Section 675 IAC 14-4.4-104 - Section N1107.1; scope
- Section 675 IAC 14-4.4-105 - Section N1107.1.1; additions and alterations: general
- Section 675 IAC 14-4.4-106 - Section N1107.3; maintenance
- Section 675 IAC 14-4.4-107 - Section N1107.4; compliance
- Section 675 IAC 14-4.4-108 - Section N1107.5; new and replacement materials
- Section 675 IAC 14-4.4-109 - Section N1107.6; historic buildings
- Section 675 IAC 14-4.4-110 - Section M1201.1; scope
- Section 675 IAC 14-4.4-111 - Section M1201.2; application
- Section 675 IAC 14-4.4-112 - Section M1202; application
- Section 675 IAC 14-4.4-113 - Section M1301.2; identification
- Section 675 IAC 14-4.4-114 - Section M1302.1; listed and labeled
- Section 675 IAC 14-4.4-115 - Section M1305.1; appliance access for inspection service, repair, and replacement
- Section 675 IAC 14-4.4-116 - Section M1305.1.3.1; ground clearance
- Section 675 IAC 14-4.4-117 - Section M1307.3.1; protection from impact
- Section 675 IAC 14-4.4-118 - Section M1411.3.1; auxiliary and secondary drain systems
- Section 675 IAC 14-4.4-119 - Section M1502.4.2; duct installation
- Section 675 IAC 14-4.4-120 - Section M1601.1.2; underground duct systems
- Section 675 IAC 14-4.4-121 - Section M1601.4.5; fireblocking
- Section 675 IAC 14-4.4-122 - Section M1602.2; return air openings
- Section 675 IAC 14-4.4-123 - Section M1801.9; fireblocking
- Section 675 IAC 14-4.4-124 - Section M2001.1.2; regulated boilers
- Section 675 IAC 14-4.4-125 - Section M2201.3; underground tanks
- Section 675 IAC 14-4.4-126 - Section M2301.1; general
- Section 675 IAC 14-4.4-127 - Section G2401.1; application
- Section 675 IAC 14-4.4-128 - Section G2403; general definitions
- Section 675 IAC 14-4.4-129 - Section G2404.5; reserved
- Section 675 IAC 14-4.4-130 - Section G2404.10; auxiliary drain pan
- Section 675 IAC 14-4.4-131 - Section G2405.1; structural safety
- Section 675 IAC 14-4.4-132 - Section G2408.4; clearances from grade
- Section 675 IAC 14-4.4-133 - Section G2411.2.1; point of connection
- Section 675 IAC 14-4.4-134 - Section G2411.2.6; separation
- Section 675 IAC 14-4.4-135 - Section G2412.1; scope
- Section 675 IAC 14-4.4-136 - Section G2412.9; identification
- Section 675 IAC 14-4.4-137 - Section G2414.3; other materials
- Section 675 IAC 14-4.4-138 - Section G2420.2; meter valve
- Section 675 IAC 14-4.4-139 - Section G2422.1; connecting appliances
- Section 675 IAC 14-4.4-140 - Section G2425.1; scope
- Section 675 IAC 14-4.4-141 - Section G2427.4.1.1; plastic vent joints
- Section 675 IAC 14-4.4-142 - Section G2427.6.11; marking
- Section 675 IAC 14-4.4-143 - Section G2427.7.13; marking
- Section 675 IAC 14-4.4-144 - Section G2427.8; venting system termination location
- Section 675 IAC 14-4.4-145 - Section G2428.1; Definitions
- Section 675 IAC 14-4.4-146 - Section G2431.1; scope
- Section 675 IAC 14-4.4-147 - Section G2448.1; water heaters
- Section 675 IAC 14-4.4-148 - Section G2452.1; boilers
- Section 675 IAC 14-4.4-149 - Section P2501; general
- Section 675 IAC 14-4.4-150 - Section P2502; existing plumbing systems
- Section 675 IAC 14-4.4-151 - Section P2503.1; reserved
- Section 675 IAC 14-4.4-152 - Section P2503.2; concealment
- Section 675 IAC 14-4.4-153 - Section P2503.5.2; finished plumbing
- Section 675 IAC 14-4.4-154 - Section P2503.8; testing of backflow prevention devices
- Section 675 IAC 14-4.4-155 - Section P2603.1; general
- Section 675 IAC 14-4.4-156 - Section P2603.4; pipes through foundation walls
- Section 675 IAC 14-4.4-157 - Section P2603.5; freezing
- Section 675 IAC 14-4.4-158 - Section P2603.5.1; sewer depth
- Section 675 IAC 14-4.4-159 - Section P2609.1; identification
- Section 675 IAC 14-4.4-160 - Section P2609.2; installation of materials
- Section 675 IAC 14-4.4-161 - Section P2706.1.2; standpipes
- Section 675 IAC 14-4.4-162 - Section P2801.6; required pan
- Section 675 IAC 14-4.4-163 - Section P2903.5; water hammer
- Section 675 IAC 14-4.4-164 - Section P2903.9.1; service valve
- Section 675 IAC 14-4.4-165 - Section P2906.9.1.2; CPVC plastic pipe
- Section 675 IAC 14-4.4-166 - Section P2906.9.1.3; CPVC/AL/CPVC pipe
- Section 675 IAC 14-4.4-167 - Section P2910.4; reserved
- Section 675 IAC 14-4.4-168 - Section P2912.15; tests
- Section 675 IAC 14-4.4-169 - Section P2913.1; general
- Section 675 IAC 14-4.4-170 - Section P2913.4; tests
- Section 675 IAC 14-4.4-171 - Section P3003.9.2; solvent cementing
- Section 675 IAC 14-4.4-172 - Section P3005.1.2; heel-inlet or side-inlet quarter bends, drainage
- Section 675 IAC 14-4.4-173 - Section P3005.2.2; reserved
- Section 675 IAC 14-4.4-174 - Section P3005.2.4; changes of direction
- Section 675 IAC 14-4.4-175 - Section P3005.4; drain pipe sizing
- Section 675 IAC 14-4.4-176 - Section P3005.4.2; building drain size and slope
- Section 675 IAC 14-4.4-177 - Table P3005.4.2; maximum number of fixture units allowed to be connected to the building drain or building drain branches
- Section 675 IAC 14-4.4-178 - Section P3007.3.5; ejector connection to the drainage system
- Section 675 IAC 14-4.4-179 - Section P3009; subsurface landscape irrigation systems
- Section 675 IAC 14-4.4-180 - Section P3010; replacement of underground building sewers and building drains by pipe burst methods
- Section 675 IAC 14-4.4-181 - Section P3011; replacement of underground sewers by PVC fold and form methods
- Section 675 IAC 14-4.4-182 - Section P3101.1; general
- Section 675 IAC 14-4.4-183 - Section P3101.2.1; venting required
- Section 675 IAC 14-4.4-184 - Section P3101.4; extension outside a structure
- Section 675 IAC 14-4.4-185 - Section P3103.1.1; roof extension
- Section 675 IAC 14-4.4-186 - Section P3103.2; frost closure
- Section 675 IAC 14-4.4-187 - Section P3105.1; distance of trap from vent
- Section 675 IAC 14-4.4-188 - Section P3114.3; where permitted
- Section 675 IAC 14-4.4-189 - Section P3201.2.1.1; potable water trap seal protection
- Section 675 IAC 14-4.4-190 - Table P3201.7; size of traps for plumbing fixtures
- Section 675 IAC 14-4.4-191 - Section E3401.2; scope
- Section 675 IAC 14-4.4-192 - Section E3401.3; not covered
- Section 675 IAC 14-4.4-193 - Section E3403.2; compliance
- Section 675 IAC 14-4.4-194 - Section E3405.2; working clearances for energized equipment and panelboards
- Section 675 IAC 14-4.4-195 - Section E3501; general
- Section 675 IAC 14-4.4-196 - Section E3601.2; number of services
- Section 675 IAC 14-4.4-197 - Section E3601.6.2; service disconnect location
- Section 675 IAC 14-4.4-198 - Section E3604.2.1; above roofs
- Section 675 IAC 14-4.4-199 - Section E3606.3; available short-circuit current
- Section 675 IAC 14-4.4-200 - Section E3608.1.2; concrete-encased electrode
- Section 675 IAC 14-4.4-201 - Section E3608.7; pool, spa, and hot tub structures and structural reinforcing steel
- Section 675 IAC 14-4.4-202 - Section E3609.6; metal water piping bonding
- Section 675 IAC 14-4.4-203 - Section E3609.7; bonding other metal piping
- Section 675 IAC 14-4.4-204 - Section E3702.9.1; minimum branch circuit for ranges
- Section 675 IAC 14-4.4-205 - Section E3702.12; branch circuits serving room air conditioners
- Section 675 IAC 14-4.4-206 - Section E3702.12.1; where no other loads are supplied
- Section 675 IAC 14-4.4-207 - Section E3702.12.2; where lighting units or other appliances are also supplied
- Section 675 IAC 14-4.4-208 - Section E3702.13; electric vehicle branch circuit
- Section 675 IAC 14-4.4-209 - Section E3704.4; lighting and general use receptacle load
- Section 675 IAC 14-4.4-210 - Section E3705.3; adjustment factor for conductor proximity
- Section 675 IAC 14-4.4-211 - Table E3801.4; allowable applications for wiring methods
- Section 675 IAC 14-4.4-212 - Table E3802.1; general installation and support requirements for wiring methods
- Section 675 IAC 14-4.4-213 - Section E3901.11; foyers
- Section 675 IAC 14-4.4-214 - Section E3901.12; HVAC outlet
- Section 675 IAC 14-4.4-215 - Section E3902.17; arc-fault-interrupter protection for branch circuit extensions or modifications
- Section 675 IAC 14-4.4-216 - Section E3905.1; box, conduit body or fitting-where required
- Section 675 IAC 14-4.4-217 - Section E3905.3.2; securing to box
- Section 675 IAC 14-4.4-218 - Table E3905.12.1 Maximum number of conductors in metal boxes
- Section 675 IAC 14-4.4-219 - Section E3905.12.2.2; clamp fill
- Section 675 IAC 14-4.4-220 - Section E3908.8.3; nonmetallic sheathed cable (Type NM)
- Section 675 IAC 14-4.4-221 - Section E4002.14; tamper-resistant receptacles
- Section 675 IAC 14-4.4-222 - Chapter 42; spas, hot tubs, and hydromassage tubs
- Section 675 IAC 14-4.4-223 - Section E4301.2; definitions
- Section 675 IAC 14-4.4-224 - Section E4301.3; spread of fire or products of combustion
- Section 675 IAC 14-4.4-225 - Chapter 44; referenced standards
- Section 675 IAC 14-4.4-226 - Appendix A; sizing and capacities of gas pipe
- Section 675 IAC 14-4.4-227 - Appendix B; sizing of venting systems serving appliances equipped with draft hoods, Category I appliances, and appliances listed for use with Type B vent
- Section 675 IAC 14-4.4-228 - Appendix C; exit terminals of mechanical draft and direct-vent venting systems
- Section 675 IAC 14-4.4-229 - Appendix D; recommended procedure for safety inspection of an existing appliance installation
- Section 675 IAC 14-4.4-230 - Appendix E; manufactured housing used as dwellings
- Section 675 IAC 14-4.4-231 - Appendix F; radon control methods
- Section 675 IAC 14-4.4-232 - Appendix G; piping standards for various applications
- Section 675 IAC 14-4.4-233 - Appendix H; patio covers
- Section 675 IAC 14-4.4-234 - Appendix I; private sewage disposal
- Section 675 IAC 14-4.4-235 - Appendix J; existing buildings and structures
- Section 675 IAC 14-4.4-236 - Appendix K; sound transmission
- Section 675 IAC 14-4.4-237 - Appendix L; permit fees
- Section 675 IAC 14-4.4-238 - Appendix M; home day care-R-3 occupancy
- Section 675 IAC 14-4.4-239 - Appendix N; venting methods
- Section 675 IAC 14-4.4-240 - Appendix O; automatic vehicular gates
- Section 675 IAC 14-4.4-241 - Appendix P; sizing of water piping system
- Section 675 IAC 14-4.4-242 - Appendix Q; tiny houses
- Section 675 IAC 14-4.4-243 - Appendix R; light straw-clay construction
- Section 675 IAC 14-4.4-244 - Appendix S; strawbale construction
- Section 675 IAC 14-4.4-245 - Appendix T; solar-ready provisions-detached one and two family dwellings and townhouses