Rule 410 IAC 6-10.1 - Commercial On-Site Sewage Systems
- Section 410 IAC 6-10.1-1 - Definitions
- Section 410 IAC 6-10.1-2 - "AASHTO" defined
- Section 410 IAC 6-10.1-3 - "ABS" defined
- Section 410 IAC 6-10.1-4 - "ANSI" defined
- Section 410 IAC 6-10.1-5 - "ASTM" defined
- Section 410 IAC 6-10.1-6 - "Cluster system" defined
- Section 410 IAC 6-10.1-7 - "Commissioner" defined
- Section 410 IAC 6-10.1-8 - "Commercial on-site sewage system" or "on-site sewage system" defined
- Section 410 IAC 6-10.1-9 - "Commercial on-site sewage system failure" defined
- Section 410 IAC 6-10.1-10 - "Construction permit" defined
- Section 410 IAC 6-10.1-11 - "Densic material" defined
- Section 410 IAC 6-10.1-12 - "Department" defined
- Section 410 IAC 6-10.1-13 - "Design daily flow" or "DDF" defined
- Section 410 IAC 6-10.1-14 - "Distribution box" defined
- Section 410 IAC 6-10.1-15 - "Drainageway" defined
- Section 410 IAC 6-10.1-16 - "Dwelling" or "residence" defined
- Section 410 IAC 6-10.1-17 - "Fill" defined
- Section 410 IAC 6-10.1-18 - "Grease trap" defined
- Section 410 IAC 6-10.1-19 - "Health officer" defined
- Section 410 IAC 6-10.1-20 - "High strength waste" defined
- Section 410 IAC 6-10.1-21 - "INDOT" defined
- Section 410 IAC 6-10.1-22 - "Interceptor drain" defined
- Section 410 IAC 6-10.1-23 - "Local health department" defined
- Section 410 IAC 6-10.1-24 - "NEMA" defined
- Section 410 IAC 6-10.1-25 - "NRCS" defined
- Section 410 IAC 6-10.1-26 - "NSF" defined
- Section 410 IAC 6-10.1-27 - "Operating permit" defined
- Section 410 IAC 6-10.1-28 - "Owner" defined
- Section 410 IAC 6-10.1-29 - "Perimeter drain" defined
- Section 410 IAC 6-10.1-30 - "Person" defined
- Section 410 IAC 6-10.1-31 - "PVC" defined
- Section 410 IAC 6-10.1-32 - "Regulatory flood elevation"or "RFE" defined
- Section 410 IAC 6-10.1-33 - "Sanitary sewerage system" defined
- Section 410 IAC 6-10.1-34 - "SDR" defined
- Section 410 IAC 6-10.1-35 - "Seasonal high water table" defined
- Section 410 IAC 6-10.1-36 - "Segment drain" defined
- Section 410 IAC 6-10.1-37 - "Septic tank" defined
- Section 410 IAC 6-10.1-38 - "Sewage" defined
- Section 410 IAC 6-10.1-39 - "Soil absorption" defined
- Section 410 IAC 6-10.1-40 - "Soil absorption system" or "soil absorption field" defined
- Section 410 IAC 6-10.1-41 - "Soil horizon" defined
- Section 410 IAC 6-10.1-42 - "Soil loading rate" defined
- Section 410 IAC 6-10.1-43 - "Soil profile analysis" defined
- Section 410 IAC 6-10.1-44 - "Soil scientist" defined
- Section 410 IAC 6-10.1-45 - "Start of construction" defined
- Section 410 IAC 6-10.1-46 - "Subsurface drainage system" defined
- Section 410 IAC 6-10.1-47 - "Technology new to Indiana" or "TNI" defined
- Section 410 IAC 6-10.1-48 - Administrative authority
- Section 410 IAC 6-10.1-49 - General sewage disposal requirements
- Section 410 IAC 6-10.1-50 - Construction permit requirements
- Section 410 IAC 6-10.1-51 - Application for construction permit
- Section 410 IAC 6-10.1-52 - Standards for issuance
- Section 410 IAC 6-10.1-53 - Construction permit conditions
- Section 410 IAC 6-10.1-54 - Operating permits
- Section 410 IAC 6-10.1-55 - Denial of an application for a construction or operating permit
- Section 410 IAC 6-10.1-56 - Revocation or modification of a construction or operating permit
- Section 410 IAC 6-10.1-57 - Petitions for appeal
- Section 410 IAC 6-10.1-58 - Violations
- Section 410 IAC 6-10.1-59 - Construction and operating permit; transferability
- Section 410 IAC 6-10.1-60 - Sewage flows
- Section 410 IAC 6-10.1-61 - Minimum separation distances
- Section 410 IAC 6-10.1-62 - Dispersal area
- Section 410 IAC 6-10.1-63 - Drainage
- Section 410 IAC 6-10.1-64 - On-site evaluation
- Section 410 IAC 6-10.1-65 - Construction of sewers
- Section 410 IAC 6-10.1-66 - Grease traps
- Section 410 IAC 6-10.1-67 - Sewage lift stations and force mains
- Section 410 IAC 6-10.1-68 - Septic tanks: general requirements
- Section 410 IAC 6-10.1-69 - Septic tanks: construction details
- Section 410 IAC 6-10.1-70 - Dosing tanks
- Section 410 IAC 6-10.1-71 - Septic tanks and dosing tanks: installation and maintenance
- Section 410 IAC 6-10.1-72 - Outlet filters
- Section 410 IAC 6-10.1-73 - Effluent pumps
- Section 410 IAC 6-10.1-74 - Distribution box specifications
- Section 410 IAC 6-10.1-75 - Pipe specifications
- Section 410 IAC 6-10.1-76 - Aggregate specifications
- Section 410 IAC 6-10.1-77 - Barrier materials
- Section 410 IAC 6-10.1-78 - Subsurface trench on-site sewage system site suitability
- Section 410 IAC 6-10.1-79 - Subsurface trench on-site sewage system type selection criteria
- Section 410 IAC 6-10.1-80 - Elevated sand mound on-site sewage system site suitability
- Section 410 IAC 6-10.1-81 - Table for on-site sewage system selection
- Section 410 IAC 6-10.1-82 - Subsurface trench on-site sewage systems: general design and construction requirements
- Section 410 IAC 6-10.1-83 - Subsurface trench gravity on-site sewage systems: design and construction requirements
- Section 410 IAC 6-10.1-84 - Subsurface trench flood dosed on-site sewage systems: design and construction requirements
- Section 410 IAC 6-10.1-85 - Subsurface trench alternating field on-site sewage systems: design and construction requirements
- Section 410 IAC 6-10.1-86 - Subsurface trench pressure distribution on-site sewage systems: design and construction requirements
- Section 410 IAC 6-10.1-87 - Elevated sand mound on-site sewage systems: design of the aggregate bed
- Section 410 IAC 6-10.1-88 - Elevated sand mound on-site sewage systems: design of basal area
- Section 410 IAC 6-10.1-89 - Elevated sand mound on-site sewage systems: dimensions of the elevated sand mound
- Section 410 IAC 6-10.1-90 - Elevated sand mound on-site sewage systems: pressure distribution network
- Section 410 IAC 6-10.1-91 - Elevated sand mound on-site sewage systems: protection of the site
- Section 410 IAC 6-10.1-92 - Elevated sand mound on-site sewage systems: requirements for system construction
- Section 410 IAC 6-10.1-93 - Elevated sand mound on-site sewage systems: installation of the effluent force main
- Section 410 IAC 6-10.1-94 - Elevated sand mound on-site sewage systems: preparation of the site
- Section 410 IAC 6-10.1-95 - Elevated sand mound on-site sewage systems: placement of the sand on the basal area
- Section 410 IAC 6-10.1-96 - Elevated sand mound on-site sewage systems: construction of the aggregate bed
- Section 410 IAC 6-10.1-97 - Elevated sand mound on-site sewage systems: placement of the soil material and final grade
- Section 410 IAC 6-10.1-98 - Abandonment of an on-site sewage system
- Section 410 IAC 6-10.1-99 - Matters incorporated by reference