Rule 327 IAC 8-3.4 - Public Water System Wells
- Section 327 IAC 8-3.4-1 - Definitions
- Section 327 IAC 8-3.4-2 - Applicability
- Section 327 IAC 8-3.4-3 - Certification
- Section 327 IAC 8-3.4-4 - Required information regarding the location of a proposed production well
- Section 327 IAC 8-3.4-5 - Required information regarding the mechanics of a new production well
- Section 327 IAC 8-3.4-6 - Postconstruction submittal of information
- Section 327 IAC 8-3.4-7 - Required easements, other permits
- Section 327 IAC 8-3.4-8 - Production well materials
- Section 327 IAC 8-3.4-9 - Separation of a production well from a potential or existing source of microbiological or chemical contamination or damage
- Section 327 IAC 8-3.4-9.1 - Sanitary setback requirements for replacement wells at noncommunity public water systems
- Section 327 IAC 8-3.4-10 - Production well design criteria
- Section 327 IAC 8-3.4-11 - Production well minimum diameter
- Section 327 IAC 8-3.4-12 - Flow rate and pressure requirements
- Section 327 IAC 8-3.4-13 - Backup provisions for production wells
- Section 327 IAC 8-3.4-14 - Hydropneumatic storage tanks
- Section 327 IAC 8-3.4-15 - Discharge piping
- Section 327 IAC 8-3.4-16 - Casing and screen requirements
- Section 327 IAC 8-3.4-17 - Pitless adapter unit requirements
- Section 327 IAC 8-3.4-18 - Cross connection control requirements
- Section 327 IAC 8-3.4-19 - Emergency operation of a production well
- Section 327 IAC 8-3.4-20 - Rotary well drilling procedure requirements
- Section 327 IAC 8-3.4-21 - Cable tool well drilling procedure requirements
- Section 327 IAC 8-3.4-22 - Bucket well requirements
- Section 327 IAC 8-3.4-23 - Grouting requirements
- Section 327 IAC 8-3.4-24 - Disinfection procedure requirements
- Section 327 IAC 8-3.4-25 - Postconstruction testing and reporting requirements
- Section 327 IAC 8-3.4-26 - Conversion of a nonproduction well to a production well
- Section 327 IAC 8-3.4-27 - Alternative to technical standards