327 Ind. Admin. Code 7.1-6-3

Current through October 16, 2024

Section 327 IAC 7.1-6-3 - Vehicle pumping system requirements

Authority: IC 13-14-8; IC 13-18-12-4

Affected: IC 13-18-12

Sec. 3.

A vehicle pumping system must meet the following requirements:

(1) The inlet and discharge of the sewage pumps must be a minimum of two and one-half (2 1/2) inches in diameter.

(2) The vehicle engine intake manifold must not be used as a vacuum source.

(3) The pump installation must prevent leakage.

(4) All exposed connections or openings must be made watertight with caps or plugs when the pumping system is being used to transfer liquid or septage.

327 IAC 7.1-6-3

Water Pollution Control Board; 327 IAC 7.1-6-3; filed Jul 8, 2002, 2:01 p.m.: 25 IR 3731; readopted filed Jun 4, 2008, 11:07 a.m.: 20080702-IR-327080207BFA

Readopted filed Jul 30, 2014, 4:04 p.m.: 20140827-IR-327140189BFA

Readopted filed 5/27/2020, 11:52 a.m.: 20200624-IR-327200186BFA

Filed 3/3/2022, 10:40 a.m.: 20220330-IR-327140029FRA