Section 326 IAC 8-2-12 - Wood furniture and cabinet coatingAuthority: IC 13-1-1-4; IC 13-7-7
Affected: IC 13-1-1-1; IC 13-7-1-1; IC 13-7-7-5
Sec. 12.
(a) This section applies to surface coated wood furnishings which include cabinets (kitchen, bath and vanity), tables, beds, chairs, sofas (non-upholstered), art objects, and any other coated furnishings made of solid wood, wood composition or simulated wood material.(b) An owner or operator of a wood furniture or cabinet coating operation subject to this section shall apply all coating material, with the exception of no more than ten (10) gallons of coating per day used for touch-up and repair operations, using one (1) or more of the following application systems: airless spray application system, air-assisted airless spray application system, electrostatic spray application system, electrostatic bell or disc application system, heated airless spray application system, roller coat, brush or wipe application system or dip-and-drain application system.(c) Compliance with the provisions of this section shall be achieved on or before December 31, 1987. An owner or operator may submit a petition to the commissioner prior to December 31, 1987 to establish an extended schedule for compliance with this section. The petition shall include both a demonstration that compliance cannot be achieved by December 31, 1987 and milestone dates for purchases or construction necessary to achieve compliance. The petition, if approved by the commissioner, shall be submitted to the U.S. EPA as a SIP revision. Final compliance shall in no case extend beyond December 31, 1988. Air Pollution Control Board; 326 IAC 8-2-12; filed Mar 10, 1988, 1:20 pm: 11 IR 2536; errata filed Jan 11, 1989, 10:00 p.m.: 12 IR 1394; readopted filed Jan 10, 2001, 3:20 p.m.: 24 IR 1477