Section 326 IAC 8-13-7 - Record keeping and reportingAuthority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17
Sec. 7.
(a) Owners or operators of a sintering process that meet the emission limits in section 3 of this rule by using a control device shall comply with the record keeping and reporting requirements in 326 IAC 8-10-9(b).(b) Owners or operators of a sintering process that meet the emission limits in section 3 of this rule by controlling the sinter burden oil and grease content shall do the following: (1) Maintain the following records: (A) Applicable operating parameter and actual operating parameter values.(C) Sampling date and time.(E) For the period May 1 through September 30, maintain the following records: (i) The VOC emitted each day.(ii) The cumulative total of VOC emitted.(iii) The sinter produced each operating day.(2) In the event that the operating parameter exceeds the applicable value, submit to the department within thirty (30) days of the exceedance the following information: (A) The name and location of the source.(B) The information required in subdivision (1)(A) through (1)(D).(C) The cause of the exceedance.(D) The corrective action taken.(c) In order to verify compliance with section 3(b) of this rule, the owner or operator shall keep the following records:(1) Operating parameter values and the corresponding VOC emission rate in pounds per ton sinter produced.(2) Sinter produced in tons each operating day.(3) VOCs emitted in pounds each operating day.(4) The cumulative total of VOCs emitted for the period May 1 through September 30.(d) Owners or operators of a sintering process shall maintain all records for a minimum of five (5) years and shall make records available to the department and the U.S. EPA upon request. Air Pollution Control Board; 326 IAC 8-13-7; filed Jun 24, 1998, 5:46 p.m.: 21 IR 4200; errata filed Feb 9, 1999, 4:04 p.m.: 22 IR 2006