Section 326 IAC 8-10-4 - Means to limit volatile organic compound emissionsAuthority: IC 13-14-8; IC 13-17-3-4
Affected: IC 13-12
Sec. 4.
(a) The owner or operator of a refinishing facility subject to this rule shall limit emissions of VOCs from refinishing operations by using coatings or surface preparation products with VOC limits based on the VOC content as applied. The VOC content shall not exceed the following limits: | Coating Category | VOC Limit |
| grams liter | lbs gallon |
| Pretreatment wash primer | 780 | 6.5 |
| Precoat | 660 | 5.5 |
| Primer/primer surfacer | 576 | 4.8 |
| Primer sealer | 552 | 4.6 |
| Topcoat | | |
| Single and two stage | 600 | 5.0 |
| Three and four stage | 624 | 5.2 |
| Multicolored topcoat | 680 | 5.7 |
| Specialty | 840 | 7.0 |
| For surface preparation products: | | |
| Type of Substrate | VOC Limit |
| grams liter | lbs gallon |
| Plastic | 780 | 6.5 |
| Other | 168 | 1.4 |
(b) Application of all specialty coatings except anti-glare/safety coatings shall not exceed five percent (5%) by volume of all coatings applied on a monthly basis. Air Pollution Control Board; 326 IAC 8-10-4; filed Oct 3, 1995, 3:00 p.m.: 19 IR 197; filed Mar 27, 2009, 9:58 a.m.: 20090422-IR-326060603FRA