326 Ind. Admin. Code 6.8-2-16
Current through October 23, 2024
Authority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17
Sec. 16.
Resco Products, Inc., in Lake County, source identification number 00222, shall meet the following emission limits:
| Source | Emission Limits | |
| lbs/ton | lbs/hr | |
| Each stack serving tunnel kiln numbers 1 (S-6) and 2 (S-3) | 1.36 | 4.50 |
| Each stack serving tunnel kiln numbers 1 (S-6) and 2 (S-3) if only one kiln is in operation | 1.36 | 8.40 |
| Lanley oven (S-7) | 0.210 | 0.840 |
| Basic dryer (stack 8) | 0.916 | 3.020 |
| Bricks (bats) crushing (D-9) | 0.024 | 0.490 |
| Rotary dryer (D-10) | 0.032 | 0.640 |
| Magnesite handling and storage (west) (D-11) | 0.020 | 0.410 |
| Magnesite screening and milling (west) (D-13) | 0.044 | 0.700 |
| Magnesite unloading and crushing (D-1) | 0.017 | 0.580 |
| Magnesite material handling and storage (east) (D-2) | 0.012 | 0.410 |
| Magnesite screening and milling (east) (D-8) | 0.051 | 1.280 |
| Simpson mixer #3 (D-6) | 0.033 | 0.230 |
| Simpson mixer #2 (D-5) | 0.0165 | 0.230 |
| DEV-22 mixer #5 (D-4) | 0.033 | 0.230 |
| 3 Tilt mixers #1, #2, and #3 (D-12B, D-12C, and D-12D) | 0.054 | 0.460 |
| DE-18 flat mixer, mixer #4 (D-14) | 0.0165 | 0.230 |
| Resin-bonded materials handling, batching and pressing (D-12A) | 0.25 | 0.93 |
326 IAC 6.8-2-16