Section 326 IAC 6-3-1.5 - DefinitionsAuthority: IC 13-14-8; IC 13-17-3-4; IC 13-17-3-11; IC 13-17-3-12
Affected: IC 13-15; IC 13-17
Sec. 1.5.
For purposes of this rule, the following definitions shall govern if there is a conflict between this rule and 326 IAC 1-2:
(1) "Aerosol coating products" means a mixture of resins, pigments, liquid solvents, and gaseous propellants packaged in a disposable can for hand-held application.(2) "Manufacturing process" means any single or series of actions, operations, or treatments in which a mechanical, physical, or chemical transformation of material occurs that emits, or has the potential to emit, particulate in the production of the product. The term includes transference, conveyance, or repair of a product.(3) "Particulate" means any finely divided solid or liquid material, other than uncombined water.(4) "Particulate matter" has the meaning defined in 40 CFR 60.2 *.(5) "Surface coating" means the application of a solvent or waterbased coating to a surface that imparts protective, functional, or decorative films in which the application emits, or has the potential to emit, particulate. "Surface coating" does not include galvanizing. *This document is incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Indiana Government Center-North, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
Air Pollution Control Board; 326 IAC 6-3-1.5; filed May 13, 2002, 11:30 a.m.: 25 IR 3052