Section 326 IAC 20-19-1 - Applicability; incorporation by reference of federal standardsAuthority: IC 13-17-3-4; IC 13-17-3-11
Affected: IC 13-15; IC 13-17
Sec. 1.
(a) This rule applies to manufacturers of the following products, as provided in 40 CFR 63.480 * of Subpart U, that are major sources of hazardous air pollutants (HAPs) as defined in Section 112(a) of the Clean Air Act: (3) Epichlorohydrin elastomers.(4) Ethylene propylene rubber.(7) Nitrile butadiene rubber.(8) Nitrile butadiene latex.(10) Polybutadiene rubber/styrene butadiene rubber produced using a solution process.(11) Styrene butadiene latex.(12) Styrene butadiene rubber produced using an emulsion process.(b) The air pollution control board incorporates by reference 40 CFR 63, Subpart U*, National Emission Standards for Hazardous Air Pollutant Emissions, Group I Polymers and Resins. *These documents are incorporated by reference. Copies may be obtained from the Government Printing Office, 732 North Capitol Street NW, Washington, D.C. 20401 or are available for review and copying at the Indiana Department of Environmental Management, Office of Air Quality, Tenth Floor, 100 North Senate Avenue, Indianapolis, Indiana 46204.
Air Pollution Control Board; 326 IAC 20-19-1; filed May 12, 1997, 10:00 a.m.: 20 IR 2761; filed May 21, 2002, 10:20 a.m.: 25 IR 3099