312 Ind. Admin. Code 29-13-3

Current through May 29, 2024
Section 312 IAC 29-13-3 - Drilling units and well spacing for vertical oil wells

Authority: IC 14-10-2-4; IC 14-37-3

Affected: IC 14-37

Sec. 3.

(a) For wells drilled or deepened for the production of oil from either the Trenton formation or the Black River formation in the shallow Trenton limestone reservoir region:
(1) the drilling unit shall contain five (5) acres of land, more or less; and
(2) the well shall be located not less than one hundred sixty-five (165) feet from the nearest external boundary lines of the lease or production unit and not less than three hundred thirty (330) feet from the nearest location of any of the following in the same individual reservoir:
(A) A producing well for oil and gas purposes.
(B) A well being drilled for oil and gas purposes.
(C) The site of a proposed well for oil and gas purposes for which a permit has been issued but the well is not yet drilled.
(b) For wells drilled or deepened for the production of oil from any formation not specified in subsection (a), the top of which lies less than four thousand (4,000) feet beneath the surface:
(1) the drilling unit shall contain not less than ten (10) acres; and
(2) the well shall be located not less than three hundred thirty (330) feet from the nearest external boundary line of the lease or production unit, and not less than six hundred sixty (660) feet from the nearest location of any of the following in the same reservoir:
(A) A producing well for oil and gas purposes.
(B) A well being drilled for oil and gas purposes.
(C) The site of a proposed well for oil and gas purposes for which a permit has been issued but the well is not yet drilled.
(c) For wells drilled or deepened for the production of oil from any formation the top of which lies equal to or greater than four thousand (4,000) feet beneath the surface:
(1) the drilling unit shall contain not less than twenty (20) acres; and
(2) the well shall be located not less than three hundred thirty (330) feet from the nearest external boundary line of the lease or production unit, and not less than six hundred sixty (660) feet from the nearest location of any of the following in the same reservoir:
(A) A producing well for oil and gas purposes.
(B) A well being drilled for oil and gas purposes.
(C) The site of a proposed well for oil and gas purposes for which a permit has been issued but the well is not yet drilled.

312 IAC 29-13-3

Natural Resources Commission; 312 IAC 29-13-3; filed 12/1/2017, 10:35 a.m.: 20171227-IR-312160230FRA
Readopted filed 1/17/2023, 1:53 p.m.: 20230215-IR-312220328RFA