Ill. Admin. Code tit. 92 § 442.240

Current through Register Vol. 49, No. 1, January 3, 2025

Section 442.240 - Glazing Materials

a) All glazing in the rear of a school bus, including the door, shall be the fixed type.

b) Laminated safety glass is optional. All applicable provisions of the FMVSS 205 ( 49 CFR 205) apply to the optional laminated safety glass and also to any plastic materials used in multiple-glazed unit, including meeting the pertinent tests indicated below, that are specified in ANSI Standard Z26.1 -1996 or Z26.1a-1996 and are grouped in Table No. 1 of that Standard. Glazing shall be identified as shown below.

Glazing installed in:	Shall meet tests grouped in Z26.1 Table No. 1 under:	Shall bear one of the following identification markings:
Windshield	Item 1, either laminated glass or multiple glazed unit	AS 1 Glass
Window or door forward of rearmost location of driver's seat back	AS 1 Glass or AS 2 Glass
All Other locations	AS 1 Glass, AS 2 Glass or AS 3 Glass

c) In addition, any exposed plastic layer of a multiple glazed unit shall be identified in conformance with the FMVSS 205 ( 49 CFR 571.205) .

d) All glazing shall be installed so the identification markings are legible.

Ill. Admin. Code tit. 92, § 442.240

Amended at 26 Ill. Reg. 3255, effective February 19, 2002

AGENCY NOTE: See Section 442.310, Window Openings, for window operation requirements.