Ill. Admin. Code tit. 44 § 1030.160

Current through Register Vol. 48, No. 36, September 6, 2024

Section 1030.160 - Selection Committee

a) CDB shall establish a committee to evaluate and select the DB entity.

b) The committee shall consist of 5 or 7 members and include at least one licensed design professional and 2 members of the public.

1) Public members may not be employed by or associated with any firm holding a contract with CDB.

2) One public member shall be nominated by associations representing the general design or construction industry and one member shall be nominated by associations that represent minority or female-owned design or construction industry businesses.

3) The licensed design professional may be an employee of CDB or a representative of the firm that prepared the scope and performance criteria.

c) The selection committee may be designated for a set term or for the particular project, subject to the RFP.

d) The members of the selection committee must certify for each RFP that no conflict of interest exists between the members and the DB entities submitting proposals. If a conflict exists, the member must be replaced before any review of proposals.

Ill. Admin. Code tit. 44, § 1030.160