Ill. Admin. Code tit. 41 § 175.460

Current through Register Vol. 48, No. 45, November 8, 2024

Section 175.460 - Marinas

a) Dispensing equipment at marine motor fuel dispensing facilities shall comply with the requirements of Section 175.450(e), with the additions or modifications specified in this Section. Marine motor fuel dispensing facilities shall also comply with Section 175.250.

1) Dispensing devices at marine motor fuel dispensing facilities may be located on open piers, wharves or floating docks, on shore, or on piers of the solid-fill type and shall be located away from other structures to provide room for safe ingress and egress of craft to be fueled.

2) Under-dispenser containment shall be required for dispensers.

3) A mechanical return reel shall be required for hose lengths in excess of 18 feet. All hose shall be secured and protected from damage and shall not be permitted to lie in the water or on the ground in a manner that is unprotected from accidental damage.

4) Dispenser nozzles shall be of the automatic closing type; hold-open clips or devices shall not be allowed.

b) Piping and Shutoff Valves

1) Anti-siphon devices such as solenoid valves shall be required when the piping slopes downward from the tank.

2) Floating docks or structures shall require flexible lines from shore to dock. Suitable lengths of approved flexible hose may be employed between the shore piping and the piping on the floating structure, as made necessary by change in water level or shoreline. A listed breakaway valve shall be installed on shore where the piping approaches the dock or other floating structure. Any product supply line shall have secondary containment, and new installations must be double-walled with interstitial monitoring after April 1, 1995. Flexible connectors shall be required at dock hinge points for rigid primary.

3) All aboveground piping shall meet the requirements of UL 1369. Such piping shall also have proper hangers and mounts and be protected from physical damage.

4) Where stray electrical currents are encountered, piping containing liquids at marine motor fuel dispensing facilities shall be electrically insulated from the shore piping.

5) A readily accessible valve to shut off the product supply from shore shall be provided in each pipeline at or near the approach to the pier and at the shore end of each marine pipeline, adjacent to the point where a flexible hose is attached.

c) Leak Detection.

All pressurized piping systems shall be equipped with line leak detectors pursuant to Section 175.640.

Ill. Admin. Code tit. 41, § 175.460

Amended at 42 Ill. Reg. 10476, effective 10/13/2018

Amended at 47 Ill. Reg. 6837, effective 5/2/2023