Ill. Admin. Code tit. 35 § 218.461

Current through Register Vol. 48, No. 25, June 21, 2024

Section 218.461 - Manufacture of Pneumatic Rubber Tires

The owner or operator of an undertread cementing, treadend cementing or bead dipping operation at a pneumatic rubber tire manufacturing source shall install and operate:

a) A capture system, with minimum capture efficiency of 65 percent by weight of VOM for treadend cementing or bead dipping operations and a capture system with a minimum capture efficiency of 55.5 percent by weight of VOM for undertread cementing; and

b) A control device that meets the requirements of one of the following:

1) A carbon adsorption system designed and operated in a manner such that there is at least a 90 percent removal of VOM by weight from the gases ducted to the control device;

2) An afterburning system that oxidizes at least 90 percent of the captured nonmethane VOMs (VOM measured as total combustible carbon) to carbon dioxide and water; and

3) An alternative VOM emission reduction system demonstrated to have at least a 90 percent overall reduction efficiency and approved by the Agency and approved by the USEPA as a SIP revision.

Ill. Admin. Code tit. 35, § 218.461

Amended at 17 Ill. Reg. 16636, effective September 27, 1993