Current through September 2, 2024
Section 58.01.25.380 - SEWAGE SLUDGE01.Purpose. This section and 40 CFR Part 503 : a. Establish standards, consisting of general requirements, pollutant limits, management practices, and operational standards, for the final use or disposal of sewage sludge, and include: i. Standards for sewage sludge applied to the land, placed on a surface disposal site, or fired in a sewage sludge incinerator.;ii. Pathogen and alternative vector attraction reduction requirements for sewage sludge applied to the land or placed on a surface disposal site; andiii. On a case-by-case basis, controls for storm water runoff from lands where sewage sludge or septage has been placed for treatment or disposal.b. Include the frequency of monitoring and recordkeeping requirements when sewage sludge is: ii. Placed on a surface disposal site; oriii. Fired in a sewage sludge incinerator; andc. Include reporting requirements for:i. Class I sludge management facilities;ii. POTWs with a design flow rate equal to or greater than one million gallons per day (1 MGD); andiii. POTWs that serve ten thousand (10,000) people or more.02.Applicability. This section and 40 CFR Part 503 apply to:a. A person, who prepares sewage sludge, applies sewage sludge to the land, or fires sewage sludge in a sewage sludge incinerator and to the owner or operator of a surface disposal site;b. Sewage sludge applied to the land, placed on a surface disposal site, or fired in a sewage sludge incinerator;c. Exit gas from a sewage sludge incinerator stack; ord. Land where sewage sludge is applied, to a surface disposal site, and to a sewage sludge incinerator.03.Exceptions to Incorporation by Reference. 40 CFR 503.1 (Purpose and Applicability) is excluded from incorporation by reference in Section 003.Idaho Admin. Code r. 58.01.25.380