Section 39.02.05.304 - GLIDER KITS01.Title Application Requirements.a. An MCO for the glider kit will be submitted with the application for title.b. If the applicant dismantles a vehicle presently titled to the applicant and uses the significant parts with the glider kit, either a statement of fact will be prepared or the applicant will complete an affidavit, identifying the significant parts by identifying numbers. If the significant parts were purchased separately from a new or used parts outlet, a bill of sale or invoice is necessary. If the significant parts were purchased from a private owner, a bill of sale is necessary.c. If the frame and cab that the parts were stripped from will never be used again, i.e., frame and cab destroyed, not salvageable, the title will be surrendered with the application. If the frame or cab can be used again, the owner or motor vehicle investigator will mark the title "frame only" or "cab only."d. The vehicle will be completely assembled and meet the requirements of Chapter 9, Title 49, Idaho Code, and the federal motor vehicle safety standards in effect for the model year at the time of application.02.Assignment of VIN. The VIN will be the number assigned to the kit by the manufacturer. In the absence of such number, the motor vehicle investigator will assign a VIN.03.Model Year. The model year will be the year of the kit, determined by priority in the following order:a. Written statement from the manufacturer.b. Seventeen (17) character VIN's model year designator;c. Designation of model year shown on an approved MCO; or04.Make of Vehicle. The make of the vehicle will be the make of the glider kit.05.Title Branded. The designation "GLIDER KIT VEHICLE" will be branded on the title.Idaho Admin. Code r. 39.02.05.304