Section 24.39.80.701 - MACHINE SAFETY REQUIREMENTS01.Harvesting Machines. Harvesting machines for cable-assisted logging operations shall comply with each of the following:a. Meet the protective structure requirements set forth in IDAPA 07.08.10.010;b. Be equipped with a certified roll-over protective structure (ROPS); andc. Be equipped with at least a four (4)-point restraint system approved by the machine's manufacturer or a qualified person.02.System Approval. The cable-assisted logging system shall be designed and constructed for cable-assisted logging applications by the original equipment manufacturer, or approved for cable-assisted logging applications in writing by the original equipment manufacturer or a registered professional engineer.03.Operation of System. The cable-assisted logging system shall be operated, inspected and maintained in accordance with the manufacturer's recommendations, specifications and limitations, or if no manufacturer's recommendations exist, then by the recommendations of a registered professional engineer. Cable-assisted logging systems not in safe operating condition shall be removed from service until repaired by a qualified person.Idaho Admin. Code r. 24.39.80.701