Idaho Admin. Code r. 24.02.01.801

Current through September 2, 2024
Section 24.02.01.801 - BOXING RING

A boxing ring will meet the following requirements:

01.Ring Dimensions. The ring will be not less than sixteen (16) feet square not more than twenty-four (24) feet square within the ropes. The ring floor will extend at least eighteen (18) inches beyond the ropes. The ring floor will be padded with ensolite or another similar closed-cell foam. Padding will extend beyond the ring ropes and over the edge of the platform, with a top covering of canvas, duck or similar material tightly stretched and laced to the ring platform. Material that tends to gather in lumps or ridges must not be used.
02.Ring Platform. The ring platform will not be more than four (4) feet above the floor of the building, and will be provided with suitable steps for use of combatants. Ring posts will be of metal, not more than three (3) inches in diameter, extending from the floor of the building to a height of fifty-eight (58) inches above the ring floor. Rings posts will be at least eighteen (18) inches away from the ropes.
03.Ropes. There will be four (4) padded ring ropes, not less than one (1) inch in diameter and wrapped in soft material. The lower rope will be eighteen (18) inches above the ring floor and offset four (4) inches to the outside of the ring from the ropes above.

Idaho Admin. Code r. 24.02.01.801

Effective June 1, 2024 (Temporary)