Section 02.02.14.351 - BIODIESELIdentification and labeling requirements for biodiesel.
01.Identification of Product. Biodiesel and biodiesel blends must be identified by the capital letter B followed by the numerical value representing the volume percentage of biodiesel fuel. (Examples: B10, B20, B100).02.Labeling of Retail Dispensers. Each retail dispenser of biodiesel or biodiesel blend containing more than five percent (5%) must be labeled with the capital letter B followed by the numerical value representing the volume percentage of biodiesel fuel and ending with the either "biodiesel" or "biodiesel blend." (Examples: B10 biodiesel, B20 biodiesel blend). a. The label must have letters in bold face block not less than one-half (1/2) inch high, with the lettering clearly legible on a contrasting background.b. The label must be displayed on both faces of the dispenser on the upper one-half (1/2) of the dispenser as near the unit price display as practical.03.Documentation for Dispenser Labeling Purposes.a. The retailer must be provided a declaration of the volume percent of the biodiesel on an invoice, bill of lading, shipping paper, or other document, at the time of delivery of the fuel.b. This documentation is for dispenser labeling purposes only; it is the responsibility of any potential blender to determine the amount of biodiesel in the diesel fuel prior to blending.04.Exemption. Biodiesel blends containing five percent (5%) or less biodiesel by volume are exempted from the requirements of Section 351 of this rule.Idaho Admin. Code r. 02.02.14.351