Section 19-147-5 - Procedures and standards for the certification of the vendor(a) The director shall issue a solicitation in accordance with state procurement rules to contract with a vendor to certify, install, maintain, monitor and remove ignition interlock devices pursuant to HRS chapter 291E.(b) The certification of the vendor shall be accomplished during the solicitation process. (1) The certification procedures shall be set forth during the solicitation process.(2) The certification standards are set forth in subsection (c).(c) The vendor shall: (1) Have the knowledge and experience to certify, install, maintain, monitor and remove ignition interlock devices;(2) Be certified by the manufacturer to install, maintain, monitor and remove the ignition interlock devices;(3) Install only ignition interlock devices that are certified pursuant to this chapter;(4) Install, maintain, monitor and remove ignition interlock devices statewide;(5) Provide training on use of the ignition interlock devices to drivers who are required to have an ignition interlock device issued pursuant to HRS chapter 261E;(6) Schedule the driver for all necessary readings and maintenance of the device; and(7) Provide periodic reports on the use of each ignition interlock device installed pursuant to HRS chapter 291E; the report shall include data such as:(A) All attempts to circumvent the device;(B) All attempts to tamper with the device;(C) All attempts to start the vehicle without first taking an initial breath test;(D) All attempts to continue driving the vehicle without taking a random retest;(E) The date, time, alcohol concentration of the driver and success or failure of each random retest;(F) The total number of events recorded by the data recorder since the last service visit; and(G) The total number of vehicle starts.[Eff FEB 14 2011] (Auth: HRS § 291E-6) (Imp: HRS § 291E-6)