Section 19-127.1-11 - Roadway lighting(a) The installation of new, or the upgrading of existing, highway lighting systems should be undertaken with the following priority, except where considerations of accident frequency or potential demand otherwise: (1) Highways, streets, and roads in urban areas.(2) Junctions of major highways in rural areas.(3) Locations on or sections of other highways, streets, and roads having high ratio of night-to-day motor vehicle or pedestrian accidents.(4) Tunnels and long underpasses.(b) Roadway lighting levels on highways with speed limits over fifty miles per hour should conform to the lighting level and uniformity prescribed in the AASHTO guides.(c) Roadway lighting levels on highways, streets, and roads should conform to the lighting levels and uniformity prescribed in the ANSI standard or AASHTO guides except that state or county agencies having jurisdiction may follow specifications outlined in the manual.(d) All roadway lighting systems should be installed according to current and acceptable electrical and construction practices.Haw. Code R. § 19-127.1-11
[Eff JAN 21 1994] (Auth: HRS § 286-8) (Imp: HRS § 286-8)