Section 16-73-20.5 - Barber training program(a) The barber training program provides the standards and procedures for barber training as identified as Exhibit A,, dated September 7, 1993, located at the end of this chapter. The program reflects the barbering subjects, the range of training hours for each subject and the minimum required operations for the identified subjects.(b) The barber training curriculum shall be not less than fifteen hundred clock hours that includes but is not limited to the subjects, hours and operations as identified as Exhibit B, dated September 7, 1993, located at the end of this chapter.(c) The barber training progress report reflects the monthly training hours and operations as identified as Exhibit C, dated September 7, 1993, located at the end of this chapter. The progress report shall be retained by the barber school or shop and be subject to inspection by the board.(d) The notice of completion or withdrawal of barber training shall be utilized to reflect the completed training in hours in the appropriate, subjects as identified as Exhibit D, dated September 7, 1993, located at the end of this chapter.(e) Sixty minutes shall constitute one curriculum hour. Theory training shall be classroom type training of reading and acquiring knowledge of the practice of barbering. Theory training shall be introduced before practical application training begins. Practical application training shall occur on a mannequin or model before training on clients.(f) Practical application operations are reflected as hands-on training in the identified subject areas whether the training occurs on mannequins, models or clients.(g) Barber training shall occur in a licensed barber school or shop. Barber students or apprentices shall first register with the board before barber training begins.Haw. Code R. § 16-73-20.5
[Eff and comp 11/25/94] (Auth: HRS § 438-5) (Imp: HRS §4387)