Section 13-168-11 - Registration of existing wells(a) Within one year from the effective date of these rules, the owner or operator of any well in existence on the effective date of these rules shall register the well with the commission on forms provided by the commission. The owner or operator shall disclose the location of such well and all other facts or information related to its geology, hydrology, and construction. Registration shall include, but not limited to, such information as water use permit number, if any; location and dimensions of the well; state-assigned well number; depths and diameters of drilled hole and casing; range of water level and salinity; pumping test results, if any; installed pump description and operating capacity; method of measuring water usage; method of construction; and well driller, if known.(b) The commission may deny the issuance of a water use permit as provided for under chapter 13-171 until such time as the applicant registers all wells which the applicant owns or operates.[Eff. MAY 27 1988] (Auth: HRS § 174C-8) (Imp: HRS §§ 91-2, 174C-26, 174C-48, 174C53, 174C-83)