Haw. Code R. § 11-279-55

Current through November, 2024
Section 11-279-55 - Analysis plan

Owners or operators of used oil processing and re-refining facilities must develop and follow a written analysis plan describing the procedures that will be used to comply with the analysis requirements of section 11-279-53 and, if applicable, section 11-279-72. The owner or operator must keep the plan at the facility.

(a) Rebuttable presumption for used oil in section 11-279-53. At at minimum, the plan must specify the following:
(1) Whether sample analyses or knowledge of the halogen content of the used oil will be used to make this determination.
(2) If sample analyses are used to make this determination:
(i) The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either:
(A) One of the sampling methods in appendix I of chapter 11-261; or
(B) [Reserved];
(ii) The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and
(iii) The methods used to analyze used oil for the parameters specified in section 11-279-53; and
(3) The type of information that will be used to determine the halogen content of the used oil.
(b) On-specification used oil fuel in section 11-279-72. At a minimum, the plan must specify the following if section 11-279-72 is applicable:
(1) Whether sample analyses or other information will be used to make this determination;
(2) If sample analyses are used to make this determination:
(i) The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either:
(A) One of the sampling methods in appendix I of chapter 11-261; or
(B) [Reserved];
(ii) Whether used oil will be sampled and analyzed prior to or after any processing/re-refining;
(iii) The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and
(iv) The methods used to analyze used oil for the parameters specified in section 11-279-72; and
(3) The type of information that will be used to make the on-specification used oil fuel determination.

Haw. Code R. § 11-279-55

[Eff ] (Auth: HRS §§ 342J-4, 342J-31, 342J-35, 342J-52) (Imp: 40 C.F.R. §279.55 )