Section 11-265-229 - Special requirements for ignitable or reactive waste Ignitable or reactive waste must not be placed in a surface impoundment, unless the waste and impoundment satisfy all applicable requirements of chapter 11-268, and:
(a) The waste is treated, rendered, or mixed before or immediately after placement in the impoundment so that: (1) The resulting waste, mixture, or dissolution of material no longer meets the definition of ignitable or reactive waste under section 11-261-21 or section 11-261-23; and(2) Subsection 11-265-17(b) is complied with; or(b)(1) The waste is managed in such a way that it is protected from any material or conditions which may cause it to ignite or react; and(2) The owner or operator obtains a certification from a qualified chemist or engineer that, to the best of his knowledge and opinion, the design features or operating plans of the facility will prevent ignition or reaction; and(3) The certification and the basis for it are maintained at the facility; or(c) The surface impoundment is used solely for emergencies.Haw. Code R. § 11-265-229
[Eff 6/18/94; comp] (Auth: HRS §§ 342J-4, 342J-31, 342J-34, 342J-35) (Imp: 40 C.F.R. §265.229 )