Section 11-264-1065 - Reporting requirements(a) A semiannual report shall be submitted by owners and operators subject to the requirements of this subchapter to the director by dates specified by the director. The report shall include the following information: (1) The EPA identification number, name, and address of the facility.(2) For each month during the semiannual reporting period: (i) The equipment identification number of each valve for which a leak was not repaired as required in subsection 11-264-1057(d).(ii) The equipment identification number of each pump for which a leak was not repaired as required in subsection 11-264-1052(c) and paragraph 11-264-1052(d) (6).(iii) The equipment identification number of each compressor for which a leak was not repaired as required in subsection 11-264-1053(g).(3) Dates of hazardous waste management unit shutdowns that occurred within the semiannual reporting period.(4) For each month during the semiannual reporting period, dates when the control device installed as required by section 11-264-1052, 11-264-1053, 11-264-1054, or 11-264-1055 exceeded or operated outside of the design specifications as defined in subsection 11-264-1064(e) and as indicated by the control device monitoring required by section 11-264-1060 and was not corrected within twenty-four hours, the duration and cause of each exceedance, and any corrective measures taken.(b) If, during the semiannual reporting period, leaks from valves, pumps, and compressors are repaired as required in subsections 11-264-1057(d), 11-264-1052(c) and paragraph 11-264-1052(d) (6), and subsection 11-264-1053(g), respectively, and the control device does not exceed or operate outside of the design specifications as defined in subsection 11-264-1064(e) for more than twenty-four hours, a report to the director is not required.Haw. Code R. § 11-264-1065
[Eff ] (Auth: HRS §§ 342J-4, 342J-31, 342J-34, 342J-35) (Imp: 40 C.F.R. §264.1065 )