Haw. Code R. § tit. 11, subtit. 1, ch. 261, app I to Part 261
The methods and equipment used for sampling waste materials will vary with the form aid consistency of the waste materials to be sampled. Samples collected using the sampling protocols listed below, for sampling waste with properties similar to the indicated materials, will be consid4red by the Agency to be representative of the waste.
Extremely viscous liquid -- ASTM Standard D140-70 Crushed or powdered material -- ASTM Standard D346-75 Soil or rock-like material -- ASTM Standard D420-69 Soil-like material -- ASTM Standard D1452-65
Fly Ash-like material -- ASTM Standard D2234-76 [ASTM standard are available from ASTM, 1916 Race St., Philadelphia, PA 19103]
Containerized liquid wastes -- "COLIWASA" described in "Test Methods for the Evaluation of Solid Waste, Physical/Chemical Methods,"1a U.S. Environmental Protection agency, office of Solid Waste, Washington, D.C. 20460. [Copies may be obtained from Solid Waste Information, U.S. Environmental Pretection Agency, 26 W. St. Clair St., Cincinnati, ohio 45268]
1aThese methods are also described in "Samplers and Sampling Procedures for Hazardous Waste Streams," EPA 600/2-80-018, January 1980.
Liquid waste in pits, ponds, lagoon, and similar reservoirs. --"Pond Sampler" described in "Test Methods for the Evaluation of Solid Waste, Physical/Chemical Methods."1a
This manual also contain additional information on application of these protocals.
Haw. Code R. tit. 11, subtit. 1, ch. 261, app I to Part 261