Rule 110-2-10-.13 - Manufacturers Unit Data PlateThe manufacturer shall install on all industrialized building units a data plate, which shall contain but not be limited to the following design information:
(1) Name and address of the manufacturer(2) Manufacturer's identification (serial) number(3) Manufacturer's plan designation (model number/name)(4) State insignia number(s)(5) Occupancy classification(6) Fire rating of exterior walls(7) Construction classification(8) Maximum snow load (roof live load)(9) Maximum wind load (velocity)(10) Seismic design category(11) Individual thermal resistance value (R-value) of walls, roof/ceiling and floors(12) Date of manufacture The data plate shall be permanently mounted in a conspicuous location in the utility area or other area as approved by the Commissioner.
Ga. Comp. R. & Regs. R. 110-2-10-.13
Authority O.C.G.A. Sec. 8-2-113.
Original Rule entitled "Manufacturer's Unit Data Plate" adopted. F. Sept. 25, 2000; eff. Oct. 15, 2000.Repealed: New Rule of same title adopted. F. Mar. 4, 2003; eff. Apr. 1, 2003, as specified by the Agency.Repealed: New Rule of the same title adopted. F. Nov. 16, 2010; eff. Jan. 1, 2011, as specified by the Agency.