Fla. Admin. Code R. 62-625.880

Current through Reg. 50, No. 244; December 17, 2024

Section 62-625.880 - Tables

(1) Selected industrial subcategories considered dilute for purposes of the combined waste stream formula.

(a) Auto and Other Laundries:

Carpet and Upholstery Cleaning

Coin-Operated Laundries and Dry Cleaning

Diaper Services

Dry Cleaning Plants except Rug Cleaning

Industrial Laundries

Laundry and Garment Services, Not Elsewhere Classified

Linen Supply

Power Laundries, Family and Commercial.

(b) Electrical and Electronic Components:

Capacitors (Fluid Fill)

Carbon and Graphite Products

Dry Transformers

Ferrite Electronic Devices

Fixed Capacitors

Fluorescent Lamps

Fuel Cells

Incandescent Lamps

Magnetic Coatings

Mica Paper Dielectric

Motors, Generators, Alternators

Receiving and Transmitting Tubes

Resistance Heaters

Resistors

Switchgear

Transformer (Fluid Fill).

(c) Metal Molding and Casting:

Nickel Casting

Tin Casting

Titanium Casting.

(d) Gum and Wood Chemicals:

Char and Charcoal Briquettes.

(e) Inorganic Chemicals Manufacturing:

Ammonium Chloride

Ammonium Hydroxide

Barium Carbonate

Calcium Carbonate

Carbon Dioxide

Carbon Monoxide and By-product Hydrogen

Hydrochloric Acid

Hydrogen Peroxide (Organic Process)

Nitric Acid

Oxygen and Nitrogen

Potassium Iodide

Sodium Chloride (Brine Mining Process)

Sodium Hydrosulfide

Sodium Hydrosulfite

Sodium Metal

Sodium Silicate

Sodium Thiosulfate

Sulfur Dioxide

Sulfuric Acid.

(f) Leather:

Gloves

Luggage.

(g) Paving and Roofing:

Asphalt Concrete

Asphalt Emulsion

Linoleum

Printed Asphalt Felt

Roofing.

(h) Pulp, Paper, and Paperboard, and Builders' Paper and Board Mills:

Groundwood-Chemi-Mechanical.

(i) Rubber Manufacturing:

Tire and Inner Tube Plants

Emulsion Crumb Rubber

Solution Crumb Rubber

Latex Rubber

Small-sized General Molded, Extruded and Fabricated Rubber Plants

Medium-sized General Molded, Extruded and Fabricated Rubber Plants

Large-sized General Molded, Extruded and Fabricated Rubber Plants

Wet Digestion Reclaimed Rubber

Pan, Dry Digestion, and Mechanical Reclaimed Rubber

Latex Dipped, Latex-Extruded, and Latex-Molded Rubber

Latex Foam.

(j) Soap and Detergent Manufacturing:

Soap Manufacture by Batch Kettle

Fatty Acid Manufacture by Fat Splitting

Soap Manufacture by Fatty Acid

Neutralization

Glycerin Concentration

Glycerin Distillation

Manufacture of Soap Flakes and Powders

Manufacture of Bar Soaps

Manufacture of Liquid Soaps

Manufacture of Spray Dried Detergents

Manufacture of Liquid Detergents

Manufacture of Dry Blended Detergents

Manufacture of Drum Dried Detergents

Manufacture of Detergent Bars and Cakes.

(k) Textile Mills:

Apparel Manufacturing

Cordage and Twine

Padding and Upholstery Filling.

(l) Timber Products Processing:

Barking Process

Finishing Processes

Hardboard-Dry Process.

(m) Footnotes.

The exemption for the manufacture of products in the Electrical and Electronic Components Category is for operations not covered by Electroplating/Metal Finishing pretreatment regulations.

Except for production attributed to lead-sheathed hose manufacturing operations.

Except for production attributed to chromic acid form-cleaning operations.

Except for production that generates zinc as a pollutant in discharge.

(2) Regulated pollutants eligible for a removal credit.

Biosolids Use or Disposal Practice
Pollutant	Land Application (mg/Kg)	Surface Disposal (mg/Kg)
Arsenic	75	73
Cadmium	-	85
Chromium	-	600
Copper	4300	-
Lead	840	-
Mercury	57	-
Molybdenum	75	-
Nickel	420	420
Selenium	100	-
Zinc	7500	-

(3) The following organic pollutants are eligible for a removal credit if the requirements for total hydrocarbons (or carbon monoxide) in Chapter 62-296, F.A.C., are met when sewage sludge is fired in a sewage sludge incinerator: Acrylonitrile, Aldrin/Dieldrin (total), Benzene, Benzidine, Benzo(a)pyrene, Bis(2-chloroethyl)ether, Bis(2-ethylhexyl)phthalate, Bromodichloromethane, Bromoethane, Bromoform, Carbon tetrachloride, Chlordane, Chloroform, Chloromethane, DDD, DDE, DDT, Dibromochloromethane, Dibutyl phthalate, 1, 2-dichloroethane, 1, 1-dichloroethylene, 2, 4-dichlorophenol, 1, 3-dichloropropene, Diethyl phthalate, 2, 4-dinitrophenol, 1, 2-diphenylhydrazine, Di-n-butyl phthalate, Endosulfan, Endrin, Ethylbenzene, Heptachlor, Heptachlor epoxide, Hexachlorobutadiene, Alphahexachlorocyclohexane, Betahexachlorocyclohexane, Hexachlorocyclopentadiene, Hexachloroethane, Hydrogen cyanide, Isophorone, Lindane, Methylene chloride, Nitrobenzene, N-Nitrosodimethylamine, N-Nitrosodi-n-propylamine, Pentachlorophenol, Phenol, Polychlorinated biphenyls, 2, 3, 7, 8-tetrachlorodibenzo-p-dioxin, 1, 1, 2, 2-tetrachloroethane, Tetrachloroethylene, Toluene, Toxaphene, Trichloroethylene, 1, 2, 4-Trichlorobenzene, 1, 1, 1-Trichloroethane, 1, 1, 2-Trichloroethane, and 2, 4, 6-Trichlorophenol.

(4) Additional pollutants eligible for a removal credit.

Biosolids Use or Disposal Practice Surface Disposal
Pollutant	LA	UL	L	I
Arsenic	-	-	100(1)	-
Aldrin/Dieldrin (Total)	2.7	-	-	-
Benzene	16(1)	140	3400	-
Benzo(a)pyrene	15	100(1)	100(1)	-
Bis(2-ethylhexyl)phthalate	-	100(1)	100(1)	-
Cadmium	-	100(1)	100(1)	-
Chlordane	86	100(1)	100(1)	-
Chromium (Total)	100	-	100(1)	-
Copper	-	46(1)	100(1)	1400
DDD, DDE, DDT (Total)	1.2	2000	2000	-
2, 4-Dichlorophenoxy-aceti	-	7	7	-
Fluoride	730	-	-	-
Heptachlor	7.4	-	-	-
Hexachlorobenzene	29	-	-	-
Hexachlorobutadiene	600	-	-	-
Iron	78(1)	-	-	-
Lead	-	100(1)	100(1)	-
Lindane	84	28(1)	28(1)	-
Malathion	-	0.63	0.63	-
Mercury	-	100(1)	100(1)	-
Molybdenim	-	40	40	-
Nickel	-	-	100(1)	-
N-Nitrosodimethylamine	2.1	0.088	0.088	-
Pentachlorophenol	30	-	-	-
Phenol	-	82	82	-
Polychlorinated biphenyls	4.6	<50	<50	-
Selenium	-	4.8	4.8	4.8
Toxaphene	10	26(1)	26(1)	-
Trichloroethene	10(1)	9500	10(1)	-
Zinc	-	4500	4500	4500

(a) Table abbreviations.

1. "LA" means land application.

2. "SD" means surface disposal.

3. "UL" means a disposal site without a liner and leachate collection system.

4. "L" means a disposal site with a liner and leachate collection system.

5. "I" means incineration.

(b) Footnotes.

The subsection (1), above, table indicates that the units are grams per kilograms - dry weight basis. All other values have the units milligrams per kilogram - dry weight basis.

Fla. Admin. Code Ann. R. 62-625.880

Rulemaking Authority 403.061(7), (31), 403.0885 FS. Law Implemented 403.0885 FS.

New 11-29-94, Amended 1-8-97, 5-10-10, Amended by Florida Register Volume 47, Number 174, September 8, 2021 effective 9/20/2021.

New 11-29-94, Amended 1-8-97, 5-10-10, 9-20-21.