Section 61-30.803 - Standards of Practice, Electrical Systems(1) Electrical systems and components include the following: (a) Service entrance conductors, drip loop, cables, and raceways;(b) Main service equipment and main disconnects;(d) Interior components of main service panels and sub panels;(f) Over current protection devices;(g) Readily accessible installed lighting fixtures, switches, and receptacles;(h) Ground fault circuit interrupters;(i) Amperage and voltage rating of electrical service;(k) Methods or types of wiring;(m) Carbon monoxide detectors;(n) Arc fault circuit interrupters.(2) The inspector shall inspect all of the visible and readily accessible electrical systems and components.(3) The inspector is not required to inspect:(a) Remote control devices;(b) Security alarm systems and components;(c) Low voltage wiring, systems and components, ancillary wiring and systems and components not a part of the primary electrical power distribution system;(d) Generators, photovoltaic solar collectors or battery or electrical storage devices and associated equipment.(4) The inspector is not required to:(a) Measure amperage, voltage or impedance;(b) Perform a load calculation;(c) Insert any tool, probe, or device into any electrical component;(d) Determine the accuracy of circuit labeling.Fla. Admin. Code Ann. R. 61-30.803
Rulemaking Authority 468.8325 FS. Law Implemented 468.8323, 468.832(1)(j) FS.