Chapter 25-A24 - PLUMBING SYSTEM
- Rule 25-A2400 - MATERIALS - APPROVED MATERIALS, USE
- Rule 25-A2401 - DESIGN, CONSTRUCTION, AND INSTALLATION - APPROVED SYSTEM AND CLEANABLE FIXTURES
- Rule 25-A2402 - DESIGN, CONSTRUCTION, AND INSTALLATION - HANDWASHING SINK, WATER TEMPERATURE, AND FLOW
- Rule 25-A2403 - DESIGN, CONSTRUCTION, AND INSTALLATION - BACKFLOW PREVENTION, AIR GAP
- Rule 25-A2404 - DESIGN, CONSTRUCTION, AND INSTALLATION - BACKFLOW PREVENTION DEVICE, DESIGN STANDARD
- Rule 25-A2405 - DESIGN, CONSTRUCTION, AND INSTALLATION - CONDITIONING DEVICE, DESIGN
- Rule 25-A2406 - NUMBERS AND CAPACITIES - HANDWASHING SINK
- Rule 25-A2407 - NUMBERS AND CAPACITIES - TOILETS AND URINALS
- Rule 25-A2408 - NUMBERS AND CAPACITIES - SERVICE SINKS
- Rule 25-A2409 - NUMBERS AND CAPACITIES - BACKFLOW PREVENTION DEVICE, WHEN REQUIRED
- Rule 25-A2410 - NUMBERS AND CAPACITIES - BACKFLOW PREVENTION DEVICE, CARBONATOR
- Rule 25-A2411 - LOCATION AND PLACEMENT - HANDWASHING SINK
- Rule 25-A2412 - LOCATION AND PLACEMENT - BACKFLOW PREVENTION DEVICE
- Rule 25-A2413 - LOCATION AND PLACEMENT - CONDITIONING DEVICE
- Rule 25-A2414 - OPERATION AND MAINTENANCE - USING A HANDWASHING SINK
- Rule 25-A2415 - OPERATION AND MAINTENANCE - PROHIBITING A CROSS CONNECTION
- Rule 25-A2416 - OPERATION AND MAINTENANCE - SCHEDULING INSPECTION AND SERVICE FOR A WATER SYSTEM DEVICE
- Rule 25-A2417 - OPERATION AND MAINTENANCE - WATER RESERVOIR OF FOGGING DEVICES, CLEANING
- Rule 25-A2418 - OPERATION AND MAINTENANCE - SYSTEM MAINTAINED IN GOOD REPAIR
- Rule 25-A2419 - EXCEPTION TO PLUMBING FACILITIES REQUIREMENTS