D.C. Mun. Regs. tit. 20, r. 20-599
The meanings ascribed to the definitions and abbreviations appearing in §§ 199.1 and 199.2 respectively of Chapter 1 shall apply to the terms and abbreviations in this chapter.
APPENDIX 5-1 | |||||
TEST METHODS FOR SOURCES OF VOLATILE ORGANIC COMPOUNDS | |||||
Source Category | EPA Document No. | Control Option | Test Method1 | ||
Bulk gasoline terminals | EPA-450/2-77-026 | Add-on2 | Methods 25A, 25B, 2A, 2B Leak tests per methods in EPA-450/2-78-051 | ||
Bulk plants | EPA-450/2-77-035 | Vapor balance system3 equipment specifications and operating procedures | Equipment inspection per methods in EPA-450/2-77-035, page 6-3 | ||
Cutback asphalt | EPA-450/2-77-037 | Water emulsion Emulsion solvent content | Direct observation by inspector ASTM Distillation Test D-244 | ||
Degreasing | Not Applicable | Low volatility VOC solvents Low or no VOC content solvents | ASTM Method D-2879-86 Method 24 | ||
Degreasing | EPA-450/2-77-022 | Equipment specifications and operating procedures | Per methods in EPA-450/2-77-022, pages 3-31, 3-33, 3-35, and 7-1 to 7-7 | ||
Add-on2 | |||||
External floating roof tanks | EPA-450/2-78-047 | Inspection, maintenance and monitoring | Per methods in EPA-450/2-78-047, pages 5-1 to 5-4 | ||
Fixed-roof tanks | EPA-450/2-77-036 | Internal floating roof4 equipment specifications and maintenance requirements | Per methods in EPA-450/2-77-036, page 6-2 | ||
Add-on2 | Method 25 | ||||
Gasoline tank trucks | EPA-450/2-78-051 | Pressure-vacuum test Inspection, maintenance and monitoring | Method 27 or methods in EPA-450/2-78-051, Appendix B Leak tests per methods in EPA-450/2-78-051 Appendix B | ||
Graphic arts: rotogravure and flexography | EPA-450/2-78-033 | Low solvent inks, high solids inks | Method 24 or 24A | ||
Add on2 | Method 25 | ||||
Graphic Arts: Offset Lithography | Not Applicable | Add-on2 Low volatility VOC cleaning solutions Low VOC content cleaning solutions Dampening solution | Method 25 or 25A ASTM Method D-2879-86 Method 24 Method 415.1 | ||
Manufacture of high density polyethylene, polypropylene and polystyrene | EPA-450/3-83-008 | Add on2 | Method 18, 25 or 25A | ||
Natural gas/gasoline processing plants | EPA-450/3-83-007 | Inspection, maintenance and monitoring | Method 21 | ||
Petroleum dry cleaners | EPA-450/3-82-009 | Operation and maintenance | Per methods in EPA-450/3-82-009, Appendix E | ||
Add-on2 | Method 25 | ||||
Petroleum refinery equipment leaks | EPA-450/2-78-036 | Inspection, maintenance and monitoring | Method 21 | ||
Petroleum refinery vacuum producing systems, wastewater separators and process unit turnarounds | EPA-450/2-77-025 | Equipment specifications and operating procedures | Per methods in EPA-450/2-77-025, page 6-2 | ||
Perchloroethylene dry cleaners | EPA-450/2-78-050 | Operation and maintenance | Per methods in EPA-450/2-78-050, pages 6-1 to 6-4 | ||
Add-on2 | |||||
Pharmaceutical manufacture | EPA-450/2-78-029 | Operation and maintenance | Per methods in EPA-450/2-78-029, page 7-2 | ||
Add-on2 | Method 25 | ||||
Rubber tire manufacture | EPA-450/2-78-030 | Add-on2 | Method 25 | ||
Service stations-Stage I | Design criteria document | Vapor balance system3 equipment specifications operating and procedures | Equipment inspection per methods in Design Criteria Document, pages 3 to 6 Leak tests per methods in EPA-450/2-78-051 | ||
Surface coating of cans, metal coils, paper, fabric, and automobiles and light-duty trucks | EPA-450/2-77-008 | Low solvent coatings | Method 24 | ||
Add-on2 | Method 25 or methods in EPA-450/2-78-041 | ||||
Surface coating of flatwood paneling | EPA-450/2-78-032 | Low solvent coatings | Method 24 or methods in EPA-450/2-78-032, page 5-1 | ||
Add-on2 | Method 25 | ||||
Surface coating of large appliances | EPA-450/2-77-034 | Low solvent coatings | Method 24 or methods in EPA-450/2-77-034 pages 5-1 to 5-4 | ||
Add-on2 | Method 25 or methods in EPA-450/2-78-041 | ||||
Surface coating of magnetic wire | EPA-450/2-77-033 | Add-on2 | Method 25 or methods in EPA-450/2-78-041 | ||
Surface coating of metal furniture | EPA-450/2-77-032 | Low solvent coatings | Method 24 or methods in EPA-450/2-77-032, pages 5-1 to 5-5 | ||
Add-on2 | Method 25 or methods in EPA-450/2-78-041 | ||||
Surface coating of miscellaneous metal parts and products | EPA-450/2-78-015 | Low solvent coatings | Method 24 or methods in EPA-450/2-78-015, page 6-1 | ||
Add-on2 | Method 25 | ||||
Synthetic organic chemicals manufacturing industry (SOCMI) equipment leaks | EPA-450/3-83-006 | Inspection, maintenance and monitoring | Method 21 | ||
Synthetic organic chemicals manufacturing industry (SOCMI) air oxidation unit processes | Add-on2 | Method 18 | |||
Volatile organic liquid storage vessels | Inspection, maintenance and monitoring | ||||
1Methods refer to those found in Appendix A to Part 60 of Title 40 of the Code of Federal Regulations unless otherwise noted.
2Add-on refers to emission control equipment, e.g. incineration, carbon adsorption, refrigeration, refrigeration/compression/absorption, etc.
3Visual inspection except for leaks.
4Visual inspections only.
D.C. Mun. Regs. tit. 20, r. 20-599