D.C. Mun. Regs. tit. 12, r. 12-B4405

Current through Register Vol. 72, No. 2, January 10, 2025
Rule 12-B4405 - SMACNA

Sheet Metal & Air Conditioning Contractors National Assoc., Inc.

4021 Lafayette Center Road

Chantilly, VA 22021

Insert a new standard reference in Chapter 44 of the Residential Code, under the subheading SMACNA, Sheet Metal & Air Conditioning Contractors National Assoc., Inc. to read as follows:

Standard reference number

Title

Referenced in code section number

SMACNA/ANSI-2005

HVAC Duct Construction Standards-Metal and Flexible (2005)

M1601.1.1

Strike standard reference number SMACNA-10, and associated Title, under subheading SMACNA, Sheet Metal & Air Conditioning Contractors National Assoc., Inc. in Chapter 44 of the International Residential Code, and insert in Chapter 44 of the Residential Code in its place, under subheading SMACNA, Sheet Metal & Air Conditioning Contractors National Assoc., Inc. a new standard reference, and associated Title, to read as follows:

Standard reference number

Title

Referenced in code section number

SMACNA 03

Fibrous Glass Duct Construction Standards (2003)

M1601.1.1, M1604.4.1

D.C. Mun. Regs. tit. 12, r. 12-B4405

Final Rulemaking published at 61 DCR 3063 (March 28, 2014 - Part 2)
The District of Columbia Residential Code (2013), referred to as the "Residential Code," consists of the 2012 edition of the International Residential Code for One- and Two-Family Dwellings, published by the International Code Council (ICC), as amended by the District of Columbia Residential Code Supplement (2013) (12 DCMR B). The International Residential Code is copyrighted by the ICC and therefore is not republished here. However, a copy of the text may be obtained at:http://publicecodes.cyberregs.com/icod/irc/2012/index.htm?bu=IC-P-2012-000002&bu2=IC-P-2012-000019.
Authority: Section 10 of the Construction Codes Approval and Amendments Act of 1986 (Act), effective March 21, 1987 (D.C. Law 6-216; D.C. Official Code § 6-1409 (2012 Repl.)) and Mayor's Order 2009-22, dated February 25, 2009, as amended.